Stan's Original 11 cell Resonant cavity Sketch and Build.

~Russ

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #50, on May 18th, 2012, 08:28 AM »
I like these games!!! Lol lets try a new hint!

Theses are off the shelf parts.... KISS...

And yes. I thought about the dioed thing or a while!!! Lol

The only thing about the spring is i havent seen it off te shelf but it's Probbly there... Manily hard to find as its stanless!

Cool beans!

KISS!!!

~Russ

Jean-Alexandre

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #51, on May 18th, 2012, 09:15 AM »
interesting link for understand the inductance and coil design.

http://www.richieburnett.co.uk/dcreschg.html

Alex

firepinto

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #52, on May 18th, 2012, 04:06 PM »
Quote from ~Russ/Rwg42985 on May 18th, 2012, 03:36 AM
Quote from Webmug on May 18th, 2012, 02:31 AM
Quote from ~Russ/Rwg42985 on May 17th, 2012, 11:14 PM
well... i and others have spent countless hours on trying to find the electrical connections on this unit.looked high and low and everywhere between! and i finaly figured it out...

spent hrs looking at the photos only to find out these were off the shelf parts... hahaha...  KISS!!!!  i love it!

Im not telling you just yet what these are... going to make a video... (not done yet)

check it out! we are replicating right??? lol well... hows this! :






i was stoked when i found out what these were... could not believe it... hahaha

Blessings to all !
~Russ
Fantastic find!!!!
This is great, looking for them for over a year too!
:cool::D

Br,
Webmug
sad thing is to buy all the parts theses will cost you about 2-8 USD per piece when complete... so your looking at 40-160 USD for the set of 20... 10 cells...

i bought some stuff on line for much cheeper than locally... so one part is around 1.10 usd and i got them off line for .11 usd... huge difference! i'm sitting at about  2usd per piece but with all the extra or min order stuff I'm at about 80$ for all the parts with shipping... egh!

then i had to drill and make each one... hahah time time... you be surprised what these are... ill give you a hint. there are 5 pieces of off the shelf parts in each connecter! :) crazy!

i would randomly look for these like every 2-3 weeks lol... then i have some friends go on a mission to find them! came back with a bunch of online links and stuff but just no where could one find them...   now i know why... :) HINT... There home made...

i will post the list of the parts when i'm done! :)

Blessings! ~Russ
Ok here is my best guess:
1 - O ring
1 - Spring
1 - Socket Cap flange head screw (allen), drilled for spring.
1 - Hex head screw, sized to fit the head inside allen screw.
1 - nylon locking nut for hex head screw

 I'm guessing but are the screws soldered together?

Nate


securesupplies

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #53, on May 25th, 2012, 12:31 PM »
:angel: I think we should support Travis to boost up drawing skills and try and match file to CNC routing file formats.

It could take the drawing work which is being done on 11 cell  
full mass product stage.  Much faster.

We have to step back and look at ourselves if e hand make ok, but if we approach large
cnc factory
 with " old school tech drawings , it delays things.

I am not familiar with industry but ,
 
I am sue they want things that plug straight into mills
lathes and routers these days.

Food for thought:huh:

Dan

reggaerican

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #54, on June 22nd, 2012, 09:29 PM »
Im new to this forum so I just wanted to throw out a HUGE thanks to you Russ and all the other members here that are working so hard to piece together this all so important puzzle Stan left us.. I have only been researching hho for around 6 months now and I am soo angry that I just now came across all this great work and teachings.. I am so excited and overwhelmed at all this new info that I cant hardly stand it..
once again thank you! thank you! thank you!
steve

Jeff Nading

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #55, on June 23rd, 2012, 05:03 AM »
Quote from reggaerican on June 22nd, 2012, 09:29 PM
Im new to this forum so I just wanted to throw out a HUGE thanks to you Russ and all the other members here that are working so hard to piece together this all so important puzzle Stan left us.. I have only been researching hho for around 6 months now and I am soo angry that I just now came across all this great work and teachings.. I am so excited and overwhelmed at all this new info that I cant hardly stand it..
once again thank you! thank you! thank you!
steve
Welcome to the forum Steve, always glad to have new members to add to the thinking process. Jump in anywhere you have an interest, questions, ask away, someone here should be able to answer most of them, Jeff.:D

reggaerican

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #56, on June 24th, 2012, 03:32 PM »
Greetings folks, there is a image that had had me scratching my head for a while now so I thought I would just ask.
here goes wish I could paste pic here but not allowed. Anyways in Stans pic of his WFC there are 5 terminals with red wires going into the side in a row. top to bottom. what are they for? My guess is sensors of some sort possibly for water level? I have been doing so much reading lately that my eyes are starting to cross and maybe I just missed it in his patent.
thanks Steve

Jeff Nading

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #57, on June 24th, 2012, 03:48 PM »
Quote from reggaerican on June 24th, 2012, 03:32 PM
Greetings folks, there is a image that had had me scratching my head for a while now so I thought I would just ask.
here goes wish I could paste pic here but not allowed. Anyways in Stans pic of his WFC there are 5 terminals with red wires going into the side in a row. top to bottom. what are they for? My guess is sensors of some sort possibly for water level? I have been doing so much reading lately that my eyes are starting to cross and maybe I just missed it in his patent.
thanks Steve
Steve you should be able to attach a photo just above where you would click to post a reply when you are posting, where it says new attachment choose file, once it loads click update attachment.:D

reggaerican

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #58, on June 24th, 2012, 04:59 PM »
ok lets try this again. lol here goes the pic. sorry my brain doesnt see ones and zeros vary well so it takes me a while to figure out the computer stuff..

Jeff Nading

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #59, on June 24th, 2012, 05:44 PM »
Quote from reggaerican on June 24th, 2012, 04:59 PM
ok lets try this again. lol here goes the pic. sorry my brain doesnt see ones and zeros vary well so it takes me a while to figure out the computer stuff..
I think you are right Steve, that they are water level probes.:D

reggaerican

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #60, on June 24th, 2012, 06:12 PM »
thanks again Jeff, stinks bieng the new guy in school, but you guys are proving to be most excellent tutors..

Jeff Nading

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #61, on June 24th, 2012, 06:43 PM »
Quote from reggaerican on June 24th, 2012, 06:12 PM
thanks again Jeff, stinks bieng the new guy in school, but you guys are proving to be most excellent tutors..
Thanks Steve, were all here to help one another, and we were all the new guy at one time or another as well, so don't feel left out, or hesitate to ask a question, someone here will most likely have the answer and remember the only dumb question is one that was not asked, so there are no dumb questions, Jeff.:D

adys15

RE: Stan's Original 11 cell Resonant cavity Sketch and Build. Gries Petty Research
« Reply #62, on January 31st, 2013, 05:04 AM »
Quote from ~Russ/Rwg42985 on December 23rd, 2011, 02:03 AM
making progress...

again this sketch will be posted once i see its done. got a lot to do still... :)

again the colors and translucent are just for nice viewing only...

enjoy! ~Russ
Hy Russ!Do you have a google schetch file ''.skp'' of the drawings posted?
or of the skp files of the single cell that you made a tutorial in google schetch.Thanks,and keep on the good work!Best regards!

securesupplies

3d Printer files 11 cell
« Reply #63, on February 6th, 2013, 03:28 AM »Last edited on February 6th, 2013, 03:42 AM by securesupplies

Hi

This section should be on 3d printer long ago
if you have skills to  convert  &  post 3d Printer files for the 11 cell parts

please post here
 
I believe t will help progress participants and new comers replications

adys15

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #64, on February 6th, 2013, 01:41 PM »
i was asking Russ for this skp file

opus1

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #65, on April 25th, 2013, 11:37 AM »
Do you have finished units for sale?

Are you willing to provide the actual CAD files so that we might build one of these units?

Would you be willing to work with us (in a collaborative fashion) on a project?

Respectfully,
Carey

securesupplies

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #66, on April 26th, 2013, 04:23 AM »
3d printer files asap!


base
body
top
caps


~Russ

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #67, on April 27th, 2013, 12:37 AM »
Quote from securesupplies on April 26th, 2013, 04:23 AM
3d printer files asap!


base
body
top
caps
http://open-source-energy.org/?tid=552

please note Dan that the 3d printed parts should not be used as final parts. this is just merrily my way to work around it for now...

~Russ

securesupplies

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #68, on April 27th, 2013, 01:38 AM »
Quote from ~Russ/Rwg42985 on April 27th, 2013, 12:37 AM
Quote from securesupplies on April 26th, 2013, 04:23 AM
3d printer files asap!


base
body
top
caps
http://open-source-energy.org/?tid=552

please note Dan that the 3d printed parts should not be used as final parts. this is just merrily my way to work around it for now...

~Russ
Sure know that it is more to get the thing in people hands , physical always makes things happen.  

even if plastic prototypes,  today we need to egt people playing and attempting thing.
today if could be 3d pastics,
tomorrow it could be 3d hybribe metals

lets get the knowledge out there and people playing with even basic design in plastic to use for machiners, save a whole lot of talking and comunicating

 it all goes to new ground where stand  stopped,
now every one can print a inject example if we post part in 3d print files, from that they can get even novice machines working on it

and measuring etc etc

all new ground lets get it out there even further


if time prevents more hand on
or current skills is whipping out 3d printer model files and converted files
lets get happening and that out there.
all will support with trying to get printer and machiner goings.

sorry just think it is a chance to something new

adys15

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #69, on April 27th, 2013, 11:17 AM »Last edited on April 27th, 2013, 02:09 PM by Matt Watts
Quote from ~Russ
http://open-source-energy.org/?tid=552

please note Dan that the 3d printed parts should not be used as final parts. this is just merrily my way to work around it for now...

~Russ
Russ why do you always post the link to 3d injector?I was asking for skp files for long time ago,do you have them or not?does not meather if they fit in real world but just to see how they come together virtualy,thanks!

firepinto

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #70, on April 27th, 2013, 11:58 AM »Last edited on April 27th, 2013, 11:59 AM by firepinto
Quote from adys15 on April 27th, 2013, 11:17 AM
http://open-source-energy.org/?tid=552

please note Dan that the 3d printed parts should not be used as final parts. this is just merrily my way to work around it for now...

~Russ


Russ why do you always post the link to 3d injector?I was asking for skp files for long time ago,do you have them or not?does not meather if they fit in real world but just to see how they come together virtualy,thanks!
The original files that BAM5 created are not done in Google Sketchup.  He used AutoDesk Inventor, which are .IPT files.  I attempted to convert the .STL file that was exported from the .IPT files, into Sketchup here:
http://open-source-energy.org/?tid=552&pid=5619#pid5619

Beware the scaling is off.  

Nate

adys15

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #71, on April 27th, 2013, 12:33 PM »Last edited on April 29th, 2013, 11:36 AM by adys15
Quote from firepinto
The original files that BAM5 created are not done in Google Sketchup.  He used AutoDesk Inventor, which are .IPT files.  I attempted to convert the .STL file that was exported from the .IPT files, into Sketchup here:
http://open-source-energy.org/?tid=552&pid=5619#pid5619

Beware the scaling is off.  

Nate
I think we all talking about ''Stan's Original 11 cell Resonant cavity Sketch '' that Russ created a clip with skp files on how it asembles/disasemble...i saw the injector skp for a long time is very well done...thanks...

Trethowen

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #72, on May 4th, 2013, 07:09 AM »Last edited on May 4th, 2013, 07:10 AM by Trethowen
Quote from ~Russ/Rwg42985 on April 27th, 2013, 12:37 AM
Quote from securesupplies on April 26th, 2013, 04:23 AM
3d printer files asap!


base
body
top
caps


So is there anyone other how has finished the CAD drawing of the :angel:Stan's Original 11 cell Resonant cavity for CNC?  I am looking for a DXF so I can get one built from ACETAL from a CNC company! can anyone help? if not what about the original Specs and I will try get them drawn up?!?!  Thanks Adam satcom1@xtra.co.nz


securesupplies

RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #73, on May 5th, 2013, 10:49 PM »

Cool Nate is Progressing
 see his you tube

Dan
Quote from Trethowen on May 4th, 2013, 07:09 AM
Quote from ~Russ/Rwg42985 on April 27th, 2013, 12:37 AM
Quote from securesupplies on April 26th, 2013, 04:23 AM
3d printer files asap!


base
body
top
caps


So is there anyone other how has finished the CAD drawing of the :angel:Stan's Original 11 cell Resonant cavity for CNC?  I am looking for a DXF so I can get one built from ACETAL from a CNC company! can anyone help? if not what about the original Specs and I will try get them drawn up?!?!  Thanks Adam satcom1@xtra.co.nz
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
« Reply #74, on May 6th, 2013, 07:57 AM »Last edited on May 9th, 2013, 02:44 AM by ~Russ/Rwg42985
Quote from ~Russ/Rwg42985 on December 20th, 2011, 02:49 PM
hello everyone!

I'm starting this thread as we will be replicating Stan's Original 11 cell Resonant cavity.

I'm sketching this up in Google sketchup for now but will be drawn up in CAD so any one can run the drawings down to the machine shop and have them made. or if your Nate of Jeff just go print one out... lol

the Google sketch is really to give people a visual as to how this cell was built. the snapshots are in clear so you can see the inner workings. the original plastic is delrin. and that is what we will be making it from.

here are some snap shots so far. i will upload the SCH file once its further complete. then you can get a real 3D view for free by using Google sketchup! yeah!  

Thanks for the support!  

all comments or questions are welcome!

~Russ

here are the original files if you'd like to give it a go for your self!

http://open-source-energy.org/rwg42985/russ/Stan%27s%20WFC%2011/stan%27s%20WFC%2011.zip
(removed possible illegal link)
~Russ

Sorry dan...