I will be ordering VIC V1.1 pcb's in the near future. I already have several people asking if they can have one too. It will be the same gold plated quality as the first ones. The cost will be 20 euro per board and 5 euro for worldwide shipping and handling so a total of 25 euros, ... oh and in regards to the recent bashing, ... if you find that too much and you can get them cheaper tell me where or order the pcb's yourself the gerber files are on the forums ;).

If you are interested put your request in this thread or PM me with the amount of pcb's you want. Delivery will be in about 4 weeks after ordering.

Last call, ... if you want a pcb let me know. I will order them tommorrow.
Sharky

Quote from Sharky on May 14th, 2012, 01:29 AM

Last call, ... if you want a pcb let me know. I will order them tommorrow.
Sharky

Hello
Where are you ordering board?

Alex

Quote from Jean-Alexandre on May 16th, 2012, 03:00 AM

Quote from Sharky on May 14th, 2012, 01:29 AM

Last call, ... if you want a pcb let me know. I will order them tommorrow.
Sharky

Hello
Where are you ordering board?

Alex

Hi Sharky

Please put me down for one board Dan
danieldonatelli@hotmail.com

Quote from securesupplies on May 17th, 2012, 03:28 AM

Quote from Jean-Alexandre on May 16th, 2012, 03:00 AM

Quote from Sharky on May 14th, 2012, 01:29 AM

Last call, ... if you want a pcb let me know. I will order them tommorrow.
Sharky

Hello
Where are you ordering board?

Alex

Hi Sharky

Please put me down for one board Dan
danieldonatelli@hotmail.com

I ordered a few extras for the late diciders so no problem ;)

I would also like a board.... I have been without internet for a while...but please put me down for one...My NAme is Dustin USA SC 307 walker st Union SC29379

Datasword and Breakzeitgeist, ... i sent you both a PM with the details.

Quote from Sharky on May 23rd, 2012, 01:57 AM

Datasword and Breakzeitgeist, ... i sent you both a PM with the details.

I would like one too! I hope I'm not too late!

Sharky, Did you post the complete gerber files anywhere?

Sharky, Did you post the complete gerber files anywhere?

Quote from HMS-776 on May 25th, 2012, 09:35 PM

Sharky, Did you post the complete gerber files anywhere?

Hey HMS,

It's in the first post in this thread:
http://open-source-energy.org/?tid=311&pid=2628#pid2628

Br,
Webmug

Thank you,

Looking at the board I have to say it's the best layout I have seen so far. I only wish I had those skills! Good job Sharky. Has anyone been testing it yet?

Quote from LittlePalm on May 25th, 2012, 05:12 PM

Quote from Sharky on May 23rd, 2012, 01:57 AM

Datasword and Breakzeitgeist, ... i sent you both a PM with the details.

I would like one too! I hope I'm not too late!

There are two that haven't payed yet. PM me with your emailaddress and shipping address and you will be the first reserve if they do not come through. Anyway if all will turn out allright we'll order a second batch in the near future if there is sufficient interrest.

Quote from HMS-776 on May 26th, 2012, 09:34 AM

Thank you,

Looking at the board I have to say it's the best layout I have seen so far. I only wish I had those skills! Good job Sharky. Has anyone been testing it yet?

Thx, spent quite a few hours on that. Still working on the partlists for several suppliers. Have not done extensive testing yet aside from a basic electrical test because i am awaiting the core from Russ which should be on its way by now.

Hi sharky,

Do you think, that it would be possible to get one too? I hope thats no to late.
thanks in advance

Quote from t3s7r on June 6th, 2012, 02:18 AM

Hi sharky,

Do you think, that it would be possible to get one too? I hope thats no to late.
thanks in advance

so far i think its too late. but this is just the prototype. so there may be a another order once tested. ?!?!

I think shaky is out of town for a bit. so he will reply once he gets back.

thanks! ~Russ

I'm very sorry for my delay the funds will be there in less than 48 hours. Thanks Dustin

Here are some high resolution shots of the board (click to enlarge):

Quote from haxar on July 18th, 2012, 01:06 PM

Here are some high resolution shots of the board (click to enlarge):

:)

Quote from ~Russ/Rwg42985 on July 18th, 2012, 11:19 PM

Quote from haxar on July 18th, 2012, 01:06 PM

Here are some high resolution shots of the board (click to enlarge):

:)

what´s the price?

ok, found it :-) 20€ + 5€ shipping worldwide.

Hi Sharky,
 
I'd like to know if the ferrite cores you will receive from Russ are the same for 1600 perm or others with lower permeability. Another question. What parts of this circuit can be used for VICoil injector.

I will appreciate your comments.

Shainagua

Quote from Shainagua on July 19th, 2012, 06:47 AM

Hi Sharky,
 
I'd like to know if the ferrite cores you will receive from Russ are the same for 1600 perm or others with lower permeability. Another question. What parts of this circuit can be used for VICoil injector.

I will appreciate your comments.

Shainagua

The core is 1000 perm.

Need one too!!!

But I have to test Tony's circuit first. He's just assembled now :

Quote from Jeff Nading on July 19th, 2012, 08:14 AM

Quote from Shainagua on July 19th, 2012, 06:47 AM

Hi Sharky,
 
I'd like to know if the ferrite cores you will receive from Russ are the same for 1600 perm or others with lower permeability. Another question. What parts of this circuit can be used for VICoil injector.

I will appreciate your comments.

Shainagua

The core is 1000 perm.

Thanks Jeff, Can you tell me where i can buy those cores.

Shainagua

Quote from Shainagua on July 19th, 2012, 08:20 PM

Quote from Jeff Nading on July 19th, 2012, 08:14 AM

Quote from Shainagua on July 19th, 2012, 06:47 AM

Hi Sharky,
 
I'd like to know if the ferrite cores you will receive from Russ are the same for 1600 perm or others with lower permeability. Another question. What parts of this circuit can be used for VICoil injector.

I will appreciate your comments.

Shainagua

The core is 1000 perm.

Thanks Jeff, Can you tell me where i can buy those cores.

Shainagua

Sorry just got back into town. The cores Russ ordered about ten, allot of us pooled our money to order them, then Russ shipped them to us when he received them. Don't know where he ordered them from.:D

Quote from bussi04 on July 19th, 2012, 03:59 AM

Quote from ~Russ/Rwg42985 on July 18th, 2012, 11:19 PM

Quote from haxar on July 18th, 2012, 01:06 PM

Here are some high resolution shots of the board (click to enlarge):

:)

what´s the price?

ok, found it :-) 20€ + 5€ shipping worldwide.

IC said the blind man
so if you put rws on the board, you can sell them on here.
thats a good idea, cut out the compitition and then sell yours at a profit.
LOL