open-source-energy.org

Open - Source - Research => HHO / Browns Gas / Hydroxy / Stan Meyer => Open-Source Research => Stan Meyer WFC => Topic started by: Sharky on May 11th, 2012, 05:17 AM

Title: VIC PCB V1.1 Ordering
Post by: Sharky on May 11th, 2012, 05:17 AM
I will be ordering VIC V1.1 pcb's in the near future. I already have several people asking if they can have one too. It will be the same gold plated quality as the first ones. The cost will be 20 euro per board and 5 euro for worldwide shipping and handling so a total of 25 euros, ... oh and in regards to the recent bashing, ... if you find that too much and you can get them cheaper tell me where or order the pcb's yourself the gerber files are on the forums ;).

If you are interested put your request in this thread or PM me with the amount of pcb's you want. Delivery will be in about 4 weeks after ordering.
Title: RE: VIC PCB V1.1 Ordering
Post by: Sharky on May 14th, 2012, 01:29 AM
Last call, ... if you want a pcb let me know. I will order them tommorrow.
Sharky
Title: RE: VIC PCB V1.1 Ordering
Post by: Jean-Alexandre on May 16th, 2012, 03:00 AM
Quote from Sharky on May 14th, 2012, 01:29 AM
Last call, ... if you want a pcb let me know. I will order them tommorrow.
Sharky
Hello
Where are you ordering board?

Alex
Title: Thank you VIC PCB V1.1 Ordering
Post by: securesupplies on May 17th, 2012, 03:28 AM
Quote from Jean-Alexandre on May 16th, 2012, 03:00 AM
Quote from Sharky on May 14th, 2012, 01:29 AM
Last call, ... if you want a pcb let me know. I will order them tommorrow.
Sharky
Hello
Where are you ordering board?

Alex
Hi Sharky

Please put me down for one board Dan
danieldonatelli@hotmail.com
Title: RE: Thank you VIC PCB V1.1 Ordering
Post by: Sharky on May 18th, 2012, 01:28 AM
Quote from securesupplies on May 17th, 2012, 03:28 AM
Quote from Jean-Alexandre on May 16th, 2012, 03:00 AM
Quote from Sharky on May 14th, 2012, 01:29 AM
Last call, ... if you want a pcb let me know. I will order them tommorrow.
Sharky
Hello
Where are you ordering board?

Alex
Hi Sharky

Please put me down for one board Dan
danieldonatelli@hotmail.com
I ordered a few extras for the late diciders so no problem ;)
Title: RE: VIC PCB V1.1 Ordering
Post by: Breakzeitgeist on May 22nd, 2012, 10:40 AM
I would also like a board.... I have been without internet for a while...but please put me down for one...My NAme is Dustin USA SC 307 walker st Union SC
29379
Title: RE: VIC PCB V1.1 Ordering
Post by: Sharky on May 23rd, 2012, 01:57 AM
Datasword and Breakzeitgeist, ... i sent you both a PM with the details.
Title: RE: VIC PCB V1.1 Ordering
Post by: LittlePalm on May 25th, 2012, 05:12 PM
Quote from Sharky on May 23rd, 2012, 01:57 AM
Datasword and Breakzeitgeist, ... i sent you both a PM with the details.
I would like one too! I hope I'm not too late!
Title: RE: VIC PCB V1.1 Ordering
Post by: HMS-776 on May 25th, 2012, 09:35 PM
Sharky, Did you post the complete gerber files anywhere?
Title: RE: VIC PCB V1.1 Ordering
Post by: HMS-776 on May 25th, 2012, 09:35 PM
Sharky, Did you post the complete gerber files anywhere?
Title: RE: VIC PCB V1.1 Ordering
Post by: Webmug on May 25th, 2012, 11:47 PM
Quote from HMS-776 on May 25th, 2012, 09:35 PM
Sharky, Did you post the complete gerber files anywhere?
Hey HMS,

It's in the first post in this thread:
http://open-source-energy.org/?tid=311&pid=2628#pid2628

Br,
Webmug
Title: RE: VIC PCB V1.1 Ordering
Post by: HMS-776 on May 26th, 2012, 09:34 AM
Thank you,

Looking at the board I have to say it's the best layout I have seen so far. I only wish I had those skills! Good job Sharky. Has anyone been testing it yet?
Title: RE: VIC PCB V1.1 Ordering
Post by: Sharky on May 28th, 2012, 03:20 AM
Quote from LittlePalm on May 25th, 2012, 05:12 PM
Quote from Sharky on May 23rd, 2012, 01:57 AM
Datasword and Breakzeitgeist, ... i sent you both a PM with the details.
I would like one too! I hope I'm not too late!
There are two that haven't payed yet. PM me with your emailaddress and shipping address and you will be the first reserve if they do not come through. Anyway if all will turn out allright we'll order a second batch in the near future if there is sufficient interrest.

Quote from HMS-776 on May 26th, 2012, 09:34 AM
Thank you,

Looking at the board I have to say it's the best layout I have seen so far. I only wish I had those skills! Good job Sharky. Has anyone been testing it yet?
Thx, spent quite a few hours on that. Still working on the partlists for several suppliers. Have not done extensive testing yet aside from a basic electrical test because i am awaiting the core from Russ which should be on its way by now.
Title: RE: VIC PCB V1.1 Ordering
Post by: t3s7r on June 6th, 2012, 02:18 AM
Hi sharky,

Do you think, that it would be possible to get one too? I hope thats no to late.
thanks in advance
Title: RE: VIC PCB V1.1 Ordering
Post by: ~Russ on June 6th, 2012, 02:24 AM
Quote from t3s7r on June 6th, 2012, 02:18 AM
Hi sharky,

Do you think, that it would be possible to get one too? I hope thats no to late.
thanks in advance
so far i think its too late. but this is just the prototype. so there may be a another order once tested. ?!?!

I think shaky is out of town for a bit. so he will reply once he gets back.

thanks! ~Russ
Title: RE: VIC PCB V1.1 Ordering
Post by: Breakzeitgeist on June 7th, 2012, 02:43 AM
I'm very sorry for my delay the funds will be there in less than 48 hours. Thanks Dustin
Title: RE: VIC PCB V1.1 Ordering
Post by: haxar on July 18th, 2012, 01:06 PM
Here are some high resolution shots of the board (click to enlarge):

(http://img98.imageshack.us/img98/6708/vicpcbsharky1800px.jpg)(http://img39.imageshack.us/img39/7622/vicpcbsharky1.jpg)

(http://img846.imageshack.us/img846/2268/vicpcbsharky2800px.jpg)(http://img692.imageshack.us/img692/2221/vicpcbsharky2.jpg)
Title: RE: VIC PCB V1.1 Ordering
Post by: ~Russ on July 18th, 2012, 11:19 PM
Quote from haxar on July 18th, 2012, 01:06 PM
Here are some high resolution shots of the board (click to enlarge):

(http://img98.imageshack.us/img98/6708/vicpcbsharky1800px.jpg)(http://img39.imageshack.us/img39/7622/vicpcbsharky1.jpg)

(http://img846.imageshack.us/img846/2268/vicpcbsharky2800px.jpg)(http://img692.imageshack.us/img692/2221/vicpcbsharky2.jpg)
:)
Title: RE: VIC PCB V1.1 Ordering
Post by: Gunther Rattay on July 19th, 2012, 03:59 AM
Quote from ~Russ/Rwg42985 on July 18th, 2012, 11:19 PM
Quote from haxar on July 18th, 2012, 01:06 PM
Here are some high resolution shots of the board (click to enlarge):

(http://img98.imageshack.us/img98/6708/vicpcbsharky1800px.jpg)(http://img39.imageshack.us/img39/7622/vicpcbsharky1.jpg)

(http://img846.imageshack.us/img846/2268/vicpcbsharky2800px.jpg)(http://img692.imageshack.us/img692/2221/vicpcbsharky2.jpg)
:)
what´s the price?

ok, found it :-) 20€ + 5€ shipping worldwide.

Title: RE: VIC PCB V1.1 Ordering
Post by: Shainagua on July 19th, 2012, 06:47 AM
Hi Sharky,
 
I'd like to know if the ferrite cores you will receive from Russ are the same for 1600 perm or others with lower permeability. Another question. What parts of this circuit can be used for VICoil injector.

I will appreciate your comments.

Shainagua
Title: RE: VIC PCB V1.1 Ordering
Post by: Jeff Nading on July 19th, 2012, 08:14 AM
Quote from Shainagua on July 19th, 2012, 06:47 AM
Hi Sharky,
 
I'd like to know if the ferrite cores you will receive from Russ are the same for 1600 perm or others with lower permeability. Another question. What parts of this circuit can be used for VICoil injector.

I will appreciate your comments.

Shainagua
The core is 1000 perm.
Title: RE: VIC PCB V1.1 Ordering
Post by: Vulcain67 on July 19th, 2012, 12:16 PM
Need one too!!!

But I have to test Tony's circuit first. He's just assembled now :

(http://img7.imageshack.us/img7/5476/circuitfront.jpg)

(http://img821.imageshack.us/img821/214/circuitback.jpg)
Title: RE: VIC PCB V1.1 Ordering
Post by: Shainagua on July 19th, 2012, 08:20 PM
Quote from Jeff Nading on July 19th, 2012, 08:14 AM
Quote from Shainagua on July 19th, 2012, 06:47 AM
Hi Sharky,
 
I'd like to know if the ferrite cores you will receive from Russ are the same for 1600 perm or others with lower permeability. Another question. What parts of this circuit can be used for VICoil injector.

I will appreciate your comments.

Shainagua
The core is 1000 perm.
Thanks Jeff, Can you tell me where i can buy those cores.

Shainagua
Title: RE: VIC PCB V1.1 Ordering
Post by: Jeff Nading on July 23rd, 2012, 02:08 PM
Quote from Shainagua on July 19th, 2012, 08:20 PM
Quote from Jeff Nading on July 19th, 2012, 08:14 AM
Quote from Shainagua on July 19th, 2012, 06:47 AM
Hi Sharky,
 
I'd like to know if the ferrite cores you will receive from Russ are the same for 1600 perm or others with lower permeability. Another question. What parts of this circuit can be used for VICoil injector.

I will appreciate your comments.

Shainagua
The core is 1000 perm.
Thanks Jeff, Can you tell me where i can buy those cores.

Shainagua
Sorry just got back into town. The cores Russ ordered about ten, allot of us pooled our money to order them, then Russ shipped them to us when he received them. Don't know where he ordered them from.:D
Title: RE: VIC PCB V1.1 Ordering
Post by: Ray Don on July 27th, 2012, 09:26 AM
Quote from bussi04 on July 19th, 2012, 03:59 AM
Quote from ~Russ/Rwg42985 on July 18th, 2012, 11:19 PM
Quote from haxar on July 18th, 2012, 01:06 PM
Here are some high resolution shots of the board (click to enlarge):

(http://img98.imageshack.us/img98/6708/vicpcbsharky1800px.jpg)(http://img39.imageshack.us/img39/7622/vicpcbsharky1.jpg)

(http://img846.imageshack.us/img846/2268/vicpcbsharky2800px.jpg)(http://img692.imageshack.us/img692/2221/vicpcbsharky2.jpg)
:)
what´s the price?

ok, found it :-) 20€ + 5€ shipping worldwide.
IC said the blind man
so if you put rws on the board, you can sell them on here.
thats a good idea, cut out the compitition and then sell yours at a profit.
LOL
Title: RE: VIC PCB V1.1 Ordering
Post by: Jeff Nading on July 27th, 2012, 10:01 AM
Quote from Ray Don on July 27th, 2012, 09:26 AM
Quote from bussi04 on July 19th, 2012, 03:59 AM
Quote from ~Russ/Rwg42985 on July 18th, 2012, 11:19 PM
Quote from haxar on July 18th, 2012, 01:06 PM
Here are some high resolution shots of the board (click to enlarge):

(http://img98.imageshack.us/img98/6708/vicpcbsharky1800px.jpg)(http://img39.imageshack.us/img39/7622/vicpcbsharky1.jpg)

(http://img846.imageshack.us/img846/2268/vicpcbsharky2800px.jpg)(http://img692.imageshack.us/img692/2221/vicpcbsharky2.jpg)
:)
what´s the price?

ok, found it :-) 20€ + 5€ shipping worldwide.
IC said the blind man
so if you put rws on the board, you can sell them on here.
thats a good idea, cut out the compitition and then sell yours at a profit.
LOL
Good looking boards guy's.:D
Title: RE: VIC PCB V1.1 Ordering
Post by: Ray Don on July 27th, 2012, 06:45 PM
Quote from Jeff Nading on July 27th, 2012, 10:01 AM
Quote from Ray Don on July 27th, 2012, 09:26 AM
Quote from bussi04 on July 19th, 2012, 03:59 AM
Quote from ~Russ/Rwg42985 on July 18th, 2012, 11:19 PM
Quote from haxar on July 18th, 2012, 01:06 PM
Here are some high resolution shots of the board (click to enlarge):

(http://img98.imageshack.us/img98/6708/vicpcbsharky1800px.jpg)(http://img39.imageshack.us/img39/7622/vicpcbsharky1.jpg)

(http://img846.imageshack.us/img846/2268/vicpcbsharky2800px.jpg)(http://img692.imageshack.us/img692/2221/vicpcbsharky2.jpg)
:)
what´s the price?

ok, found it :-) 20€ + 5€ shipping worldwide.
IC said the blind man
so if you put rws on the board, you can sell them on here.
thats a good idea, cut out the compitition and then sell yours at a profit.
LOL
Good looking boards guy's.:D
and being sold
can we see one working and making bubbles
i work hard for my money
can i see one making bubbles?
can someone donate me one so i can try it first to see if it makes any bubbles?
Quote from Ray Don on July 27th, 2012, 06:45 PM
Quote from Jeff Nading on July 27th, 2012, 10:01 AM
Quote from Ray Don on July 27th, 2012, 09:26 AM
Quote from bussi04 on July 19th, 2012, 03:59 AM
Quote from ~Russ/Rwg42985 on July 18th, 2012, 11:19 PM
:)
what´s the price?

ok, found it :-) 20€ + 5€ shipping worldwide.
IC said the blind man
so if you put rws on the board, you can sell them on here.
thats a good idea, cut out the compitition and then sell yours at a profit.
LOL
Good looking boards guy's.:D
and being sold
can we see one working and making bubbles
i work hard for my money
can i see one making bubbles?
can someone donate me one so i can try it first to see if it makes any bubbles?
in fact you are advertising a product for sale and by rule number 10, this is advertising for distrubution of a product for sale
at 20 yuros you are making 15 yuros profit, which means you are advertising for your business.

line 10 of the rules, you are violating
and by the last rule
i cast one vote to have you banned for advertising your business
Title: RE: VIC PCB V1.1 Ordering
Post by: gpssonar on July 27th, 2012, 07:37 PM
Again you have no idea what a business is. Just to show you that these boards are open sourced. Copy and past the photos and make one yourself if you dont want to buy one at cost not including his time. He has done all the work for you tracing Stans drawing and making the board. So copy the photos and make your own board or even better than that he has posted the girber files so you can have one made for youself.
Title: RE: VIC PCB V1.1 Ordering
Post by: Jeff Nading on July 27th, 2012, 07:52 PM
Quote from Ray Don on July 27th, 2012, 06:45 PM
Quote from Jeff Nading on July 27th, 2012, 10:01 AM
Quote from Ray Don on July 27th, 2012, 09:26 AM
Quote from bussi04 on July 19th, 2012, 03:59 AM
Quote from ~Russ/Rwg42985 on July 18th, 2012, 11:19 PM
:)
what´s the price?

ok, found it :-) 20€ + 5€ shipping worldwide.
IC said the blind man
so if you put rws on the board, you can sell them on here.
thats a good idea, cut out the compitition and then sell yours at a profit.
LOL
Good looking boards guy's.:D
and being sold
can we see one working and making bubbles
i work hard for my money
can i see one making bubbles?
can someone donate me one so i can try it first to see if it makes any bubbles?
Mind my asking who's "we" ? Your new here, so we will try to make an allowance for you, we as you call us have seen bubbles, as you call them. But that is not the main focus here. We have nothing to prove to anyone, we do all try working together to maybe someday make a difference in the way we all live, if not us, someone else. I can say one thing for sure, the world we live in is changing and will get much worse  before it gets better.
Title: RE: VIC PCB V1.1 Ordering
Post by: Jeff Nading on July 27th, 2012, 08:18 PM
Quote from Ray Don on July 27th, 2012, 06:45 PM
Quote from Jeff Nading on July 27th, 2012, 10:01 AM
Quote from Ray Don on July 27th, 2012, 09:26 AM
Quote from bussi04 on July 19th, 2012, 03:59 AM
Quote from ~Russ/Rwg42985 on July 18th, 2012, 11:19 PM
:)
what´s the price?

ok, found it :-) 20€ + 5€ shipping worldwide.
IC said the blind man
so if you put rws on the board, you can sell them on here.
thats a good idea, cut out the compitition and then sell yours at a profit.
LOL
Good looking boards guy's.:D
and being sold
can we see one working and making bubbles
i work hard for my money
can i see one making bubbles?
can someone donate me one so i can try it first to see if it makes any bubbles?
Quote from Ray Don on July 27th, 2012, 06:45 PM
Quote from Jeff Nading on July 27th, 2012, 10:01 AM
Quote from Ray Don on July 27th, 2012, 09:26 AM
Quote from bussi04 on July 19th, 2012, 03:59 AM
what´s the price?

ok, found it :-) 20€ + 5€ shipping worldwide.
IC said the blind man
so if you put rws on the board, you can sell them on here.
thats a good idea, cut out the compitition and then sell yours at a profit.
LOL
Good looking boards guy's.:D
and being sold
can we see one working and making bubbles
i work hard for my money
can i see one making bubbles?
can someone donate me one so i can try it first to see if it makes any bubbles?
in fact you are advertising a product for sale and by rule number 10, this is advertising for distrubution of a product for sale
at 20 yuros you are making 15 yuros profit, which means you are advertising for your business.

line 10 of the rules, you are violating
and by the last rule
i cast one vote to have you banned for advertising your business
Whom are you voting to be banned from this forum newbie? I think you need to play nice, you have only made 10 post and you are already rocking the boat, do you have any real contributions to help us on this forum or do you wish to continue in disrupting the peace?
Title: RE: VIC PCB V1.1 Ordering
Post by: ~Russ on July 28th, 2012, 05:57 AM
Quote from Jeff Nading on July 27th, 2012, 08:18 PM
Quote from Ray Don on July 27th, 2012, 06:45 PM
Quote from Jeff Nading on July 27th, 2012, 10:01 AM
Quote from Ray Don on July 27th, 2012, 09:26 AM
Quote from bussi04 on July 19th, 2012, 03:59 AM
what´s the price?

ok, found it :-) 20€ + 5€ shipping worldwide.
IC said the blind man
so if you put rws on the board, you can sell them on here.
thats a good idea, cut out the compitition and then sell yours at a profit.
LOL
Good looking boards guy's.:D
and being sold
can we see one working and making bubbles
i work hard for my money
can i see one making bubbles?
can someone donate me one so i can try it first to see if it makes any bubbles?
Quote from Ray Don on July 27th, 2012, 06:45 PM
Quote from Jeff Nading on July 27th, 2012, 10:01 AM
Quote from Ray Don on July 27th, 2012, 09:26 AM
IC said the blind man
so if you put rws on the board, you can sell them on here.
thats a good idea, cut out the compitition and then sell yours at a profit.
LOL
Good looking boards guy's.:D
and being sold
can we see one working and making bubbles
i work hard for my money
can i see one making bubbles?
can someone donate me one so i can try it first to see if it makes any bubbles?
in fact you are advertising a product for sale and by rule number 10, this is advertising for distrubution of a product for sale
at 20 yuros you are making 15 yuros profit, which means you are advertising for your business.

line 10 of the rules, you are violating
and by the last rule
i cast one vote to have you banned for advertising your business
Whom are you voting to be banned from this forum newbie? I think you need to play nice, you have only made 10 post and you are already rocking the boat, do you have any real contributions to help us on this forum or do you wish to continue in disrupting the peace?
This thred was a one time shot for others here to pool in on an opensorce project to get cheeper Vic bords to those here who wanted them as experimental.

Sence this time is done for ordering. This thred will be closed so others don't get confused.