introducing slic3r prusa edition

~Russ


haxar

Re: introducing slic3r prusa edition
« Reply #1, on February 6th, 2017, 11:13 PM »
I've used Slic3r ever since. It's been recommended for a while.

This is new. Prusa edition.

X-Blade

Re: introducing slic3r prusa edition
« Reply #2, on February 7th, 2017, 05:05 AM »
Did you tried the Cura Slicer (not the plugin). That is very cool to.
It allows to simulate layer to layer and is has customizeable settings.

Matt Watts

Re: introducing slic3r prusa edition
« Reply #3, on February 7th, 2017, 05:08 AM »
Quote from Josef Průša
Everything is being rewritten into C++ and parallelization is being introduced to get more out of the modern computers.
Too funny.

If the data center I work at were to force this same concept, the applications could be housed in a computer room the size of my garage.  But you can't talk to the executives, they're way too smart to listen to guys that have been in the trenches 30+ years.  I say, "It's their money.  Let them spend it how they want."


haxar

Re: introducing slic3r prusa edition
« Reply #4, on February 7th, 2017, 05:29 AM »
Quote from Josef Průša
Everything is being rewritten into C++ and parallelization is being introduced to get more out of the modern computers.
Perl. I won't touch. I tried. Not again.

~Russ

Re: introducing slic3r prusa edition
« Reply #5, on February 7th, 2017, 11:47 AM »
Quote from X-Blade on February 7th, 2017, 05:05 AM
Did you tried the Cura Slicer (not the plugin). That is very cool to.
It allows to simulate layer to layer and is has customizeable settings.
yes i used it off and on for a while, it also has its pros and cons.

after a night of slic3r... im a bit frustrated. but i keep at it for a while.

Kisslicer sure has its details i LOVE... i just cant seem to find in any other slicer.

and i also just can see me self getting simplified3D... of witch looks Exactly like what I'm wanting...

~Russ
Re: introducing slic3r prusa edition
« Reply #6, on February 7th, 2017, 11:48 AM »
Quote from Matt Watts on February 7th, 2017, 05:08 AM
Too funny.

If the data center I work at were to force this same concept, the applications could be housed in a computer room the size of my garage.  But you can't talk to the executives, they're way too smart to listen to guys that have been in the trenches 30+ years.  I say, "It's their money.  Let them spend it how they want."
ahhhh well you know... its open source :)

past that i know nothing lol

~Russ

Matt Watts

Re: introducing slic3r prusa edition
« Reply #7, on February 8th, 2017, 06:21 AM »
Quote from ~Russ on February 7th, 2017, 11:47 AM
and i also just can see me self getting simplified3D... of witch looks Exactly like what I'm wanting...
Do I need to send you a donation?

As much printing as you do, it seems nuts to not have the best tools.

~Russ

Re: introducing slic3r prusa edition
« Reply #8, on February 8th, 2017, 07:00 AM »
Quote from Matt Watts on February 8th, 2017, 06:21 AM
Do I need to send you a donation?

As much printing as you do, it seems nuts to not have the best tools.
No don't do that...

If I ask I'm sure they would be happy to be a sponcer. It's like free advertising.

I just can't get my self to do it. That's a lot of $$  for a slicer.

But I guess I should try it for the 2 weeks and then if I like it reach out to see if they will do a sponcer. I'm almost sure they will

~Russ
Re: introducing slic3r prusa edition
« Reply #9, on February 13th, 2017, 02:20 PM »
Quote
Hello Russ,

Thank you for considering Simplify3D. Unfortunately at this time we have finalized our marketing arrangements with people who are supporting us on YouTube.

We wish you the best of luck sharing helpful information to spread adoption of 3D printing!

Thanks,
- - -
Cody Markham
well it never heart to ask! lol

~Russ

Matt Watts

Re: introducing slic3r prusa edition
« Reply #10, on February 13th, 2017, 04:18 PM »
So how about you do the two week trial and if you like it...

You still accepting donations?

~Russ

Re: introducing slic3r prusa edition
« Reply #11, on February 15th, 2017, 08:58 AM »Last edited on February 15th, 2017, 09:00 AM
Quote from Matt Watts on February 13th, 2017, 04:18 PM
So how about you do the two week trial and if you like it...

You still accepting donations?
Matt Matt,

Yeah i do and i would try it for 2 weeks but...

you have to pay for it and then if you dont like it... you get your money back.

i think thats kinda lame.

but ok...

so as of now i still sit here messing with other slicers lol .. i will say that anytime i use support with Slic3r t takes FORVER to slice. I mean like 4 hrs on one complex part.

and 30 min or so on a not so complex support.

i find this odd.

but ok...

any hoo,

it dose do others tings that i need for some stuff. so like any thing use one part of a software for the parts you need and others for others.

...

I have know idea if simplified 3d is any better or has all the options, but i think i dose. not sure till i try it i guess.

~Russ

Re: introducing slic3r prusa edition
« Reply #12, on February 15th, 2017, 12:49 PM »
hummm... well i think scene i will be / have been using this for work. ill jut make it an expense...

~Russ
Re: introducing slic3r prusa edition
« Reply #13, on February 15th, 2017, 02:05 PM »
oh done... thats better...

now lets see how this puppy runs...

hope this is a " all in one solution" ill let you know lol

~Russ