Hello,

My name is Anthony Swancoat and I created a unique video for this energy forum presenting the time space antenna. The video is about 35 minutes long. I invite you to watch the video as I present a new device capable of solving our needs for unlimited energy. The video is a youtube unlisted video so once you attempt to view the video click "Watch this video on Youtube". Again, this video was created solely for the open-source-energy.org forum.

Thanks a ton,

Anthony

Time Space Antenna Presensation - Private Video

Most interesting, many thanks for this :thumbsup:

I'm not sure where to start Anthony.

I see a lot of Masonic references in your channeled contraption.  Myself, I'm just a little leery of pulling entities from time space into this world without having a better comprehension of what's out there wanting to be here.  I suppose with the attitude, "Heck, we cannot possibly make anything worse", maybe it's worth looking at.  On the other hand, opening star gates all over the place, could be a real bad idea, kind of like splitting the atom.

This is the kind of thing that falls way outside of scientific research and is similar in ways to the Keshe Technology.  It doesn't play by known testable rules.  It could very well have an intelligence of its own that is way beyond what we could deal with.  My spider sense tells me, to just take it very slow and know exactly what you are doing and why you are doing it.

You made a point in your video that you did not logically expound on.  That being this spirit or soul.  We strive for some sort of free energy device thinking it will drastically simplify our lives and make the world a much better place.  I fully agree, it could do that in the proper hands.  However, if our soul lives on and vastly transcends our simple mortal existence, why would we be concerned if evil fully takes over this planet and destroys all life upon it?   So what right?  We continue on in some form of energetic existence.  We don't die.  So why fight the forces of darkness?  We cannot lose this battle even if we completely give up.  There's a mix in your presentation between science and religion that appears to me to lack logic.  Maybe you would care to explain, or maybe not.  I can take my queue from there.


M@

As far as my own experience about consciousness goes I can agree to Anthony according to our state of existence.
15 years ago we set up a remote viewing project to track UFOs in Namibia at a large farm site.

The information we got is that those flying  vehicles transcend thru matter by using a specific sound&light signature so that the vehicle material and lifeforms can vibrate thru matter.

Hi Matt,

Thank you for the reply. I've never studied masonry and that isn't the source of my project/material. The time/space antenna is not designed to bring entities from time space into our world, but rather it would draw energy from the electromagnetic grid of the Earth thus accessing unlimited energy, as Tesla sought to do. The attitude behind the device is not a "we cannot make things worse so lets just try it". The attitude is more of a "are humans who truly seek unlimited energy willing to investigate a device that has produced physical evidence though its origins seem taboo?"

This device would not open star gates. One cannot fairly say this device falls outside of scientific research when the device produced physical evidence of a plug of frying a plug in my apartment (@ 33.42 in the video). However, I understand your sense telling you to take it slow about this project and perhaps this isn't for you.

In regards to your question about why being concerned about evil taking over the Earth if we live on... Again, the present effects the future and how we act in the present creates future paradigms. What future paradigm do you wish to contribute towards (peace, love, joy, or hate, oppression, greed, etc.)? The soul does not transcend physical reality until the soul learns the lessons of physical reality. So, an attitude of I'll just wait the evil out is likely not the reason your soul is here. Your soul is here to contribute, participate in and aid in the creation of a benevolent reality.

Cheers my friend,

Anthony

Hello Gunther,

Thank you for sharing! How very cool. If you have more research to do in the same line of work, I've heard Sedona Arizona is a hot bed for that type of activity. Towards the very end of my video, I speak of an experiment involving a hollow copper ball that can be bombarded by sound vibrations to move the ball through time/space let's say across a desk. I would like to investigate that project soon and it sounds like that is how objects (such as crafts) may vibrate through the density of 3D.

Cheers my friend,

Anthony

Here is a very cool picture of a prototype designed in an imaging program and a prototype that someone built. The time / space antenna works by sparking the device with an initial AC pulse then the device taps into the electromagnetic grid of the Earth. I built a working model that somehow blew out an electrical socket at my house by simply being near it. I am seeking someone with a hypothesis of how to setup an ac pulse and how to setup a transformer to step down the energy. Any thoughts?

Quote from aswan4 on August 27th, 2016, 02:33 PM

Here is a very cool picture of a prototype designed in an imaging program and a prototype that someone built. The time / space antenna works by sparking the device with an initial AC pulse then the device taps into the electromagnetic grid of the Earth. I built a working model that somehow blew out an electrical socket at my house by simply being near it. I am seeking someone with a hypothesis of how to setup an ac pulse and how to setup a transformer to step down the energy. Any thoughts?

That looks so cool :thumbsup:
Got any schematics to share for your build?

This just got my attention.
I haven't  read through all this post yet but will do soon.
The image you posted looks to me very similar to some old work by Otis Carr.....very interesting :)

Hi there Lynx, the antenna in the image above is not my antenna. Attached is an picture of my device, not quite as nice as the computer design.

The antenna does have exact proportions but there are some variables to the build such as... Gauge of copper wire, number of spirals in each cone and the distance between the spirals/revolutions. These are all primitive prototypes and as we make progress we will fine tune those variables. I have to look for my sheet involving the schematics but I will find it and post it because I drew up exact dimensions.

Quote from PJ on August 27th, 2016, 03:33 PM

This just got my attention.
I haven't  read through all this post yet but will do soon.
The image you posted looks to me very similar to some old work by Otis Carr.....very interesting :)

I looked at the sheet you posted PJ and it looks like a very similar concept. 33 degree angled cones intercepting each other. Otis Carr is writing about gravity generation where I am using the intercepting cones for electromagnetic energy which I hope to step down into electrical energy capable of supplying a home with enough power to run heat/appliances/etc. I will research Otis Carr and get back in touch. Thanks for the post. 

I've just watched your video - an interesting watch.
Yes if you have any furher information on how this might be wired etc that would be useful.
I think Ill look over Otis Carr's work again as sonwthing here is quite interesting to me.
Thanks for sharing
PJ

Have you measured any output from the copper tubing using any type of meter?
Electromagnetic radiation will interact with metal by creating electron movement (  some very small voltage potential), such as a tv or radio antenna, the length shape of the antenna is tuned to the wavelength of the electromagnetic waves.
There is some possibility you have created an antenna, in fact you can be quite certain you have created some sort of antenna for electromagnetic radiation.
Since the spiral is changing the physical dimensions of the tube ( i.e. its radius is constantly changing), it is possible you have an antenna that might interact with a wide range of wavelengths.
Antenna theory is not something I'm familiar with, so I can not advise on the interaction of that shape with em radiation. But the dimension of the largest radius might interact with radiowaves and the smaller radius with some microwaves. If there is any creation of electron currents within the tubes it would likely be due to em radiation.
There should be some way to measure any electric currents within the tubes, but you would expect it to be very small current.
I suspect the power point blow out was not related to the device, you might want to have a look at the power point and see what was the cause of the shorting, there will likely be evidence at the rear of the power point of what caused the shorting.

if you type into google
conical helix antenna
or
tapered helix antenna

and view images

You will find a wealth of information on this configuration. You would need to gain some understanding of how a standard conical helix antenna operates ( which it seems is extremely well understood) and then move into combining two conical helix antennae into the configuration you are experimenting with.

also might be useful

https://www.youtube.com/watch?v=7bDyA5t1ldU

Hi Anthony
In your video you mention that the design for this antenna came from Darryl Anka / Brasha - can you please post as much of Darryls information that you have as this may provide more insite to the device.
Thanks in advance
PJ

Quote from brettly on August 28th, 2016, 04:10 AM

Have you measured any output from the copper tubing using any type of meter?
Electromagnetic radiation will interact with metal by creating electron movement (  some very small voltage potential), such as a tv or radio antenna, the length shape of the antenna is tuned to the wavelength of the electromagnetic waves.
There is some possibility you have created an antenna, in fact you can be quite certain you have created some sort of antenna for electromagnetic radiation.


Since the spiral is changing the physical dimensions of the tube ( i.e. its radius is constantly changing), it is possible you have an antenna that might interact with a wide range of wavelengths.
Antenna theory is not something I'm familiar with, so I can not advise on the interaction of that shape with em radiation. But the dimension of the largest radius might interact with radiowaves and the smaller radius with some microwaves. If there is any creation of electron currents within the tubes it would likely be due to em radiation.
There should be some way to measure any electric currents within the tubes, but you would expect it to be very small current.
I suspect the power point blow out was not related to the device, you might want to have a look at the power point and see what was the cause of the shorting, there will likely be evidence at the rear of the power point of what caused the shorting.

Hi there Brettly,

Thanks for the feedback. I have not yet measured outputs from the antenna as I am hoping to partner with some researchers who are better trained to conduct these measurements than myself. I definitely believe the blow out in the wall was due to this device. The very first day I built the device and set it near the wall socket location the plug fried. I can't safely assume that in my seven years of living at this location a plug randomly sparked and fried on the same day I built one of Earth's first time/space antennas.

All the best to you!

- Anthony

Quote from PJ on August 28th, 2016, 02:40 PM

Hi Anthony
In your video you mention that the design for this antenna came from Darryl Anka / Brasha - can you please post as much of Darryls information that you have as this may provide more insite to the device.
Thanks in advance
PJ

Hi PJ,

The videos about the time space antenna can be found on youtube if you simply search the terms "bashar time/space antenna". I am not going to re-post the videos here because the recordings are from a youtube channel called "FreeEnergyVideos". Bashar recently asked for no videos to be copied or posted unless done directly through Daryl and Bashar via the youtube channel ''Bashar Communications".

Cheers!

Anthony

Here is a youtube researcher who has made some progress on a device he built himself. I sent him a message asking him to join the forum to discuss and share his findings.

Thanks! Anth

https://www.youtube.com/watch?v=zWPF5hOwngQ

Quote from Lynx on August 27th, 2016, 02:44 PM

That looks so cool :thumbsup:
Got any schematics to share for your build?

Lynx,

Yes, here are the precise specs, my friend. I believe the size has to do with a tuning of the device to the Earth's field. The antenna is built to specifically fit into a three foot pyramid. I do own a copper pyramid that could could house this device for experimentation purposes. Again, I am here looking for people to help conduct the experimentation and research.

- Anthony

Here is a model image of the time space antenna in a 3 ft pyramid.

Cheers!

Anth

Awesome, thanks for sharing :-)
Are there any electric schematics to go with this aswell?
Like how do you drive this coil/antenna, what's the circuit for collecting/exciting energy, etc etc,
I'm just looking for something to get you going, or an explanation of the concept behind the antenna, like what kind of circuit would be needed to get the antenna to do it's goodness?

Quote from Lynx on September 1st, 2016, 09:21 AM

Awesome, thanks for sharing :-)
Are there any electric schematics to go with this aswell?
Like how do you drive this coil/antenna, what's the circuit for collecting/exciting energy, etc etc,
I'm just looking for something to get you going, or an explanation of the concept behind the antenna, like what kind of circuit would be needed to get the antenna to do it's goodness?

Lynx,

These questions are exactly why I am here. This questions are for us to answer and figure out. All I know is the device requires an initial AC pulse, then the device will setup a self-sustaining energy field whereby energy can be a transformed and stepped down into usable electricity. I am not an expert on circuitry or electric schematics. I am not even a novice. My plan is to collaborate with a team or someone who is a novice or expert. I want to mail the antenna to them to have some basic circuits run through the device and have some experiments tested to get this device going. I don't feel the circuitry would be complicated compared to some of the works I see on other pages. Just testing basic circuits may prove to get the device going. Any ideas on who the right candidate could be?

Anthony

Ok, gotcha.
Well, there's plenty of members here in the know who could pitch in their 2 cents worth, right now I'm thinking of substituting the coil in say a Slayer Exciter circuit with the antenna instead, see what gives, should be simple enough to start with ;-)

Yes sir! How very exciting. Thanks for the help Lynx and as discussion continues I will prepare to send the coil off for testing when someone is ready to experiment with this slayer exciter circuit. I'm pumped.

Haha :-D
Keep it up :thumbsup: :-)