Maybe you can get this inventor to reveal his method?  Sterling Allen interviews inventor.
supposed to be only about $30 in parts?

https://www.youtube.com/watch?v=G3g8dEcARJA

hey, here is were we need to go.

the information needs to go on the member projects.

people are now claiming 300 mpg

and i feel this thread had helped bring this out.

the only problem is no one is doing it.

here is a link to bring you up to speed how easy this is.

come on help a brother out. lets get this out there please..

/watch?v=II1_Vg8dP64

/watch?v=YJLFAXVNv_Y


here is the ideal way to do it.

now what happened to picture.

was some information lost during the change over?

 this is always the case in modern time, a loss of information.?

https://www.youtube.com/watch?v=P8taPpNXBEw#ws

well I see you boys are pinning many posts, when you gonna this one?  thanks..

Quote from freethisone on February 26th, 2014, 10:19 AM

https://www.youtube.com/watch?v=P8taPpNXBEw#ws

well I see you boys are pinning many posts, when you gonna this one?  thanks..

That's funny free.  If you do a little experimenting you will find that crude oil isn't loaded with polymers that don't burn.

I have a two gallon fuel can sitting here in my garage that was filled with gasoline a year and a half ago.  You can use this stuff as fire retardant as it absolutely will not burn; not with a spark, not with a flame and even not with a propane torch.  The tiny bit of burnable petroleum that was in it when I first filled it is long gone and all that is left is the waste products and polymers which are the majority by volume.  I can guarantee not even a Geet engine can burn this stuff.  So when you pay $3.50 for a gallon of this stuff, keep in mind $3.45 of it is pure toxic hazardous waste that is completely useless and unburnable.  They should be paying you $10,000 per gallon for disposing of this stuff properly.

Why do think automobiles now all have fuel injection systems?  Simple, so you can pour a ton of hazardous waste through all those cars running around and spread the mess far and wide.  With all this advance automotive engineering; we still can't get 100 MPG or better for all road worthy vehicles?  Seriously?  I'm supposed to believe that?  It isn't the engines. It's a scam, plain and simple.  Remember, to them, the solution to pollution is dilution.

You didn't think these fat-fuks with more chins than a Chinese phonebook where actually going to give you something you could use did you?  Oh no, the BP, EXXON execs know exactly what they're doing.  They make a living murdering all their competition; that includes you and I, friends & families, our pets, our forests, our skies, our oceans and our land.  They are liars and murderers free and should be treated as such along with everyone else that helps them.  Same goes for the nuclear industry.  See a pattern here?  Anyone in-charge of Energy becomes as cold as the snow and as evil as satan himself.  If it were up to me, I'd start a new food source for buzzards and worms.

You say what the rest of us mean Matt.
In my, perhaps not so humble, opinion, I can't wait until the machine that gives us free energy in a closed loop with no outer strings attached whatsoever hits the forums open source and all.
I honestly think (hope) that such a machine would bring about the end of our current way of living, where we're slaves under the ones keeping us addictive to life as we know it, forcing us to live our lives barely being able to keep ourselves and our families alive while we're constantly worrying about losing our jobs, careers, homes, etc etc.
Yes we live in a free society, but if we choose to go living off the grid we're really out on the deep end, no wonder why (almost) all of us fear starting out on that road, free energy is more or less a must have before any such endeavour can be launched.

well i can tell how frustrated you are, but this is 100 years old, and is also related to the epg. this is the real reason the epg was abandon. because out put will go up due to induction coils. this is an epg. you can add coils on the heat exhanger to work as an epg..

vapur

how you like me now? :P :P

add an inline glow plug, or even start with an ultra sonic chamber, Steam chamber. and out put can reach 1000 MPG, and also you will have free electricity as a bonus as an epg and pump all in one.

how you like me now? :P :P

Quote from freethisone on February 26th, 2014, 07:15 PM

how you like me now? :P :P

I like you just fine Free.

Neat video.  Built one of those myself several years back.  Works real nice with alcohol made from rotten peaches.

Like I said above, it's not the engines that are the problem.  I have gallons of used motor oil that I wish I could find a way to extract the useful material from.  If you heat it, it turns to tar at some point.  Need a way to keep the air away from it until you are actually ready to burn it.

Pin

tesla

 at 47 min plus the vapour runs a generator.

pin

the point i was making is dont you think this thread should also be pinned?

you dont need a carb at all, or even spark plugs.

same ting

 one of many ways of doing the same thing as GEET  PAT 4,177,779

this will be my first project when i get some cash, feel free to pin this thread.
as you see i will take the hot air gases from a wankel motor like this one, and make it into a reactor.
i will even introduce hho gas, and run this in a self loop system, i will also add induction coils to a heat exchanger, and on top of that the prop will spin a alternator or two.

the end result will be a generator that runs on a gallon of fuel over a extended period of time, generating, and extracting energy through induction coils. i will then add a gas light processor chamber, and even sonic steam chamber . on top of that a H-cat system to boot.

the very hot un-burned fuel from a wankle motor will be just what the doctor ordered for a self loop system..

any questions?

pin

Fast forward to 38 seconds to see the end result.

plasmatron cool

As an advancement  use a tesla turbine in combination with the hot exuast, in a self loop system. O:-)

every aspect may be used as described. this link uses steam 

https://www.google.com/patents/US3918412?dq=US3918412&hl=en&sa=X&ei=Dm0PU-vmEKjI0wGIl4CYBg&ved=0CDMQ6AEwAA

this link uses a type of H-cat as a pre treatment. https://www.google.com/patents/US5738692?dq=US5738692&hl=en&sa=X&ei=uW0PU-S_Jo3L0gHxkYC4Bg&ved=0CDUQ6AEwAA

i can use a H-Cat to heat the flow pipe with a simple 12 volt battery, and a hho cell. self charge of course. the use of permanent magnets may also be used for higher output at the induction coils. the EPG all over againO:-) :cool:

as a free bonus a step by step link to get you drooling.  http://tesla3.com/free_websites/geet_plasma.html

ON HHO ohhhhhhhhhh :D :P https://www.youtube.com/watch?v=bdrjkIZebtM#

Quote from freethisone on February 27th, 2014, 06:59 AM

as a free bonus a step by step link to get you drooling.  http://tesla3.com/free_websites/geet_plasma.html

Just this one link will keep me busy for months Free.  And this statement here kicks the door wide open:


Electrodynamic Force (Fe) become stronger than the Coulomb Force (Fe)


If I'm reading it correctly, this would force ions to transmute into other stable elements/molecules.

https://www.youtube.com/watch?v=d3b3h2cEbHw#ws


adding a vacume carbon arc tube to this devise could increase  power 6 more times.. what do you think?

Quote from freethisone on February 27th, 2014, 06:59 AM

this will be my first project when i get some cash, feel free to pin this thread.
as you see i will take the hot air gases from a wankel motor like this one, and make it into a reactor.
i will even introduce hho gas, and run this in a self loop system, i will also add induction coils to a heat exchanger, and on top of that the prop will spin a alternator or two.

the end result will be a generator that runs on a gallon of fuel over a extended period of time, generating, and extracting energy through induction coils. i will then add a gas light processor chamber, and even sonic steam chamber . on top of that a H-cat system to boot.

the very hot un-burned fuel from a wankle motor will be just what the doctor ordered for a self loop system..

any questions?

pin

Fast forward to 38 seconds to see the end result.

plasmatron cool

As an advancement  use a tesla turbine in combination with the hot exuast, in a self loop system. O:-)

every aspect may be used as described. this link uses steam 

https://www.google.com/patents/US3918412?dq=US3918412&hl=en&sa=X&ei=Dm0PU-vmEKjI0wGIl4CYBg&ved=0CDMQ6AEwAA

this link uses a type of H-cat as a pre treatment. https://www.google.com/patents/US5738692?dq=US5738692&hl=en&sa=X&ei=uW0PU-S_Jo3L0gHxkYC4Bg&ved=0CDUQ6AEwAA

i can use a H-Cat to heat the flow pipe with a simple 12 volt battery, and a hho cell. self charge of course. the use of permanent magnets may also be used for higher output at the induction coils. the EPG all over againO:-) :cool:

as a free bonus a step by step link to get you drooling.  http://tesla3.com/free_websites/geet_plasma.html

ON HHO ohhhhhhhhhh :D :P https://www.youtube.com/watch?v=bdrjkIZebtM#

heat

this is why i had said this type of motor is perfect for a reactor.  all that heat is due to wasted fuel burning up in the exaust pipes.

http://tesla3.com/free_websites/geet_plasma.html

if magnets are important, and we have a way to make a magnetic field unipolar on the inner tube, you may advance in any number of ways.

i am talking about 2 tubes wraped with wire so the inner tube acts as a north pole, and the outer a south pole.

thanks to some information we have this needs to be tried in many aplications were plasma is inside the heat exhanger, and a permanent  magnetic field is used to keep it off the walls. 

cheers. :P

US119825  patent

Quote from Matt Watts on February 27th, 2014, 11:54 AM

Just this one link will keep me busy for months Free.  And this statement here kicks the door wide open:


Electrodynamic Force (Fe) become stronger than the Coulomb Force (Fe)


If I'm reading it correctly, this would force ions to transmute into other stable elements/molecules.

oh yes your right again Matt. i saw all three iron men movies recently, and its all in the pudding. remember he made the new element by use of laser. Iron man and the Arc reactor. the EXPO STAR K. all of it. EX means external. PO means precession. star K. the initial force required at K.  the binary relation. and there is that EPG in the movie also.

 I have a great idea for a geet reactor.need a 3d print.

https://www.youtube.com/watch?v=YQs2wUUmYaY#ws 

GEET

 geet epg cheers

5 parts, to plasma epg reaction..

epg

GEET

https://www.youtube.com/watch?v=aQ3Xb4Hb5Ts#ws

i like the way he said vapour..

https://www.youtube.com/watch?v=CvW_Q_G3pF4#ws

https://www.youtube.com/watch?v=FLc-IhI7DuY#ws

this would be a good advancment together with a injector.

High pressure of up to 200 psi. that give volume you need. CFM

I wonder if i could send it through a H-cat, or to the geet reactor. or instead best of all run this steam
with a tesla turbine to create plasma. or vapour of high energy. ;) :D O:-)

When he put the lighter over the jar to ignite the bubbles, I noticed those bubbles barely popped, so the content must be mostly steam and very little HHO.  Do the same test with dry HHO and the pops would splash most of the water out of the jar.

So I don't know if what he is making is usable as an engine fuel or not.  Someone would have to test that.

Quote from Matt Watts on May 1st, 2014, 05:35 AM

When he put the lighter over the jar to ignite the bubbles, I noticed those bubbles barely popped, so the content must be mostly steam and very little HHO.  Do the same test with dry HHO and the pops would splash most of the water out of the jar.

So I don't know if what he is making is usable as an engine fuel or not.  Someone would have to test that.

This is exactly what is needed.  As a prime mover, and as a plasma source for epg. i can combine this in one unit.

thanks to a Telsa Turbine, and this type of vapour. i would indeed have the workings of a magnetic fluid, a fuel, and as a volume of air to help dilute the HHO in a car. Like stan used other additions of gas to get the proper mixture of 14. to 1 ratio.

let me simply give you another of my invention advancments. you have a GEET reactor, or you have a Tesla turbine. You have a coduit to act as an epg through induction, you have the effect of turbine torarfi the vapour fluid. you have the ability to make additions with LIGHT UV infra red. you have the ablity to create a lot of heat. through a catalist and so on. in a closed loop, or with a internal combustion engien in combanation of my mention. Neo magnets to polarize. and so forth. induction coils, and a condensor. ad capacitors, in one awsome unit. with alternators spinning as a result. and a rare fuel in a process of change, then it may be as a fuel, for pressure at the turbine apply to internal engiens.. O:-)

as an advancment. i can use the geet reactor to create a high pressure at the Turbine.   cheers. go make it please.

Tesla descibed the heat of turbine temratures un-able to handle the heat that may be imparted. add super or turbo charge possible.

there is a high velocity as tempratures reach 1500 degrees. I use 3 turbines, i put one rc airplane wankle motor, or two. i use them together if i choose.


i use one to three geet reactors between each turbine if needed to accelerate the vapour.  i use 2 to 3 alternators and add a pully to the rc motor. i use a h-cat, and so on to assure bombardment, and higher  energy plasma state.

 i include steam, and hho together in a resonante steam chamber. i use ultrasonic tranducer in conjuntion with these advancments.

i have the ability to use each turbine as a faraday generator as a electrical source, i have the ability to have epg type coils for induction of magnetic fluid.  i include spark gaps, or glow plugs. i continue along these lines. and this will enable me to run 100% water as fuel. O:-) O:-)

also i now am able to btain 10 times output power.  by use of many generating effect. or fuel in a closed loop system. ;):cool: :cool:

:P known advanced patents. ..

reactor

https://www.google.com/?tbm=pts&gws_rd=ssl#q=electric+vaporizer&start=10&tbm=pts

https://www.google.com/patents/US1119840?dq=ininventor:%22Frank+Kuhn%22&hl=en&sa=X&ei=yOuSU_m3Mo7hsASCw4HIBw&ved=0CF8Q6AEwCDgK

Quote from freethisone on May 3rd, 2014, 07:05 AM

... in a closed loop system.

When I hear someone mention that phrase, I know what it means, but if you get into an argument with someone like Peter Lindemann or Aaron Murukami remind them that ALL systems are Open Loop because we have absolutely no control what goes on in those systems at the quantum level.  Which means zero point energy can (and does) enter the system at multiple locations.  ZPE interacts with everything--some places it adds energy and other places it takes it back.  In conventional systems, by definition ZPE is completely excluded, which is sorely incorrect.  Remember that and set folks straight who attempt to persuade you otherwise.

a vapour...

omg


Wow  Russ talked to Joe..  did you tell him what we can do? or to visit this thread? cheers O:-)