Quote from Rwg42985 on November 11th, 2011, 07:16 AM

Quote from KevinW-dirtwill on November 10th, 2011, 10:50 PM

Quote from p@ul$on@!vy on November 10th, 2011, 08:56 AM

Quote from KevinW-dirtwill on November 3rd, 2011, 10:29 PM

First look at Russ' addition to the Output Circuit. Great addition Russ... Brilliant mind!!

Also here is Stan's pulsing box (Bottom Black Box)... It seems that he uses the same circuit to pulse the L.E.D's, H.V. Coils, Cavity, and Cell

great work Mr Kevin,
hoping for a water car soon
rgds paul

Thanks p@ul$on@!vy. It feels great to contribute to the cause. Not long ago I wasn't sure of my direction, but now I have found a nice groove. For all of you that are anxious to help, your input and ideas are welcome, some kind of videos, photos, links etc... or anything to convey your ideas better are encouraged. Another great way is to promote the forums anywhere you can. Now more and more people want to be involved this research. Its an amazing thing...


I'm thinking the Advanced PCB should be done tomorrow night or so... When that is complete, I am going to design a basic board for those that want a single freq gen for pulsing a cell.
Although the one Russ just built will work (See video), I recommend waiting for the new basic PCB board.

https://www.youtube.com/watch?v=GMU8MWoDuvs&feature=channel_video_title

Goodnight everyone,

Kevin
___________________________________________________________

Update, Basic schematics are almost complete :)

Kevin, i think that the basic gen needs gating... that's will be the basic one.
the advanced one will be the 6.12 we are building now.

and that's it...

Thoughts?

PS like the new layout. put the irfp's further apart (atleast 10 "dots" on the pbc program)  also do ground the irfp!

~Russ

I think lets scrap the Version 40. It needs the second powersupply to ground the IRFP properly and keep the circuit protected.


My next though is someone needs to make that online parts list you were talking about. Your recomendation was digikey.com right? This way someone can go to Digikey website and buy all the parts in one shot

hello everyone, here is an update. i added a volt and amp meter and some notes to this schematic.

also uploading a new vid of the finished russtic 4.5 complete box. ill post as soon at its uploaded.

thanks, ~Russ

Quote from Rwg42985 on November 14th, 2011, 11:44 PM

hello everyone, here is an update. i added a volt and amp meter and some notes to this schematic.

also uploading a new vid of the finished russtic 4.5 complete box. ill post ass soon at its uploaded.

thanks, ~Russ

Its all coming together nicely...

The PCB design is almost complete as well.

Here is a sneak peak at the uncompleted board

Russtic 4.5 done and working well!!!

A Note To those who are building this version please ground your IRFP mosfet to the Ground on the Circuit Board.

https://www.youtube.com/watch?v=l82e1ICCXLU

enjoy, ~Russ

Quote from KevinW-dirtwill on November 14th, 2011, 11:54 PM

Quote from Rwg42985 on November 14th, 2011, 11:44 PM

hello everyone, here is an update. i added a volt and amp meter and some notes to this schematic.

also uploading a new vid of the finished russtic 4.5 complete box. ill post ass soon at its uploaded.

thanks, ~Russ

Its all coming together nicely...

The PCB design is almost complete as well.

Here is a sneak peak at the uncompleted board

Hola, muy buen trabajo, puedes parsar los archivos .sch del circuito y el .pcb del PCB que mostras en el archivo . jpg adjunto.
gracias

Hello, very good job, files can be parsed .sch and circuit .pcb PCB to show in the file. jpg attachment.
thanks

Quote from Rwg42985 on November 15th, 2011, 05:04 PM

Russtic 4.5 done and working well!!!

A Note To those who are building this version please ground your IRFP mosfet to the Ground on the Circuit Board.

https://www.youtube.com/watch?v=l82e1ICCXLU

enjoy, ~Russ

Russ,

Some good beats and rhythm going there, that is music to my ears. You should really consider quiting your day job and becoming a DJ ;) That is totally awesome! Good work.

Scott

Quote from Rwg42985 on November 15th, 2011, 05:04 PM

Russtic 4.5 done and working well!!!

A Note To those who are building this version please ground your IRFP mosfet to the Ground on the Circuit Board.

https://www.youtube.com/watch?v=l82e1ICCXLU

enjoy, ~Russ

hi russ nice job have you got any scope pics of the output from the circuit
thanks for all you do for us peter

Quote from Rwg42985 on November 15th, 2011, 05:04 PM

Russtic 4.5 done and working well!!!

A Note To those who are building this version please ground your IRFP mosfet to the Ground on the Circuit Board.

https://www.youtube.com/watch?v=l82e1ICCXLU

enjoy, ~Russ

Hi Russ, I just bought a new scope like yours a few mounts back, have not used it yet, mainly because I don't know how :blush: :D :huh: . but I'll learn. Say if you make a video using your scope, Could you show how you connected the scope to your new Russtic circuit, just so I don't blow mine up, :angel:  good job on the circuit by the way :cool::cool: Kevin and Russ you guy's are top notch, Thanks.

Buenas Pedro,el pcb del ultimo diseño no ha sido terminado todavia pero el del video que russ acaba de colgar lo tienen puesto desde hace tiempo,tienes todos los datos necesarios para hacer la replica del video.

Hello Pedro, the pcb of the last schematic is not finished yet but you have all the info in this forum to replicate the one Russ posted.

Quote from Pedro on November 15th, 2011, 05:21 PM

Quote from KevinW-dirtwill on November 14th, 2011, 11:54 PM

Quote from Rwg42985 on November 14th, 2011, 11:44 PM

hello everyone, here is an update. i added a volt and amp meter and some notes to this schematic.

also uploading a new vid of the finished russtic 4.5 complete box. ill post ass soon at its uploaded.

thanks, ~Russ

Its all coming together nicely...

The PCB design is almost complete as well.

Here is a sneak peak at the uncompleted board

Hola, muy buen trabajo, puedes parsar los archivos .sch del circuito y el .pcb del PCB que mostras en el archivo . jpg adjunto.
gracias

Hello, very good job, files can be parsed .sch and circuit .pcb PCB to show in the file. jpg attachment.
thanks

ALL,
Here is all the links to files for the Rustic Frequency Gen. 4.5

A Note To those who are building this version please ground your IRFP mosfet to the Ground on the Circuit Board.

The PCB is 4.5 and the Schematic is 4.2 but as long as everything is in the 4.XX its fine.

here is the PCB: http://open-source-energy.org/rwg42985/russ/russtic_testfiles/PCB/Russtic%20Freq%20Gen%20w%20Gating%20PCB%20IMG%204.5.jpg

here is the .pcb file, you will need this to print out the PCB to the proper size  : http://open-source-energy.org/rwg42985/russ/russtic_testfiles/PCB/Russtic%20Freq%20Gen%20w%20Gating%20PCB%204.5.pcb
you will need the PCB software to do this, here: http://www.expresspcb.com/ExpressPCBHtm/Download.htm

Here is the Schematic: http://open-source-energy.org/rwg42985/russ/russtic_testfiles/SCH/Russtic%20Freq%20Gen%20w%20Gating%20SCH%204.6.bmp

Please note the Jumpers that must be installed for this Circuit to work! There not labeled on the PCB. i will update this as soon as i can untill then here is a photo of the jumpers installed:


 
This test box is designed to test the Stan Meyer's resonant WFC. but it is also a good test box for Manny other applications.

for those who did not see this yet, here is the generator in action!

https://www.youtube.com/watch?v=l82e1ICCXLU

Thanks to all for the support and to Kevin who has been a huge part of this build!

god bless! ~Russ

GO HIT SOME RESONANCE!

[/quote]Hi Russ, I just bought a new scope like yours a few mounts back, have not used it yet, mainly because I don't know how :blush: :D :huh: . but I'll learn. Say if you make a video using your scope, Could you show how you connected the scope to your new Russtic circuit, just so I don't blow mine up, :angel:  good job on the circuit by the way :cool::cool: Kevin and Russ you guy's are top notch, Thanks.[/quote]i know how ya feel!

basically just connect the ground (Small black lead with alagater clip) to the ground of the circuit, then start pokeing around with the probe...

then play with the settings on the scope.

( i don't recommended you do this unless you know what your doing) but i like to hold the probe and touch the circuit! lol so cool how the signal travails right threw you...  ( low voltage circuits only please!!!! lol)

ummm, not much else to show you.

let me know if i get some time i will try to make a demo but i think there are some already out there and probably a lot better! lol

~Russ

Quote from Muxar on November 15th, 2011, 11:48 PM

Buenas Pedro,el pcb del ultimo diseño no ha sido terminado todavia pero el del video que russ acaba de colgar lo tienen puesto desde hace tiempo,tienes todos los datos necesarios para hacer la replica del video.

Hello Pedro, the pcb of the last schematic is not finished yet but you have all the info in this forum to replicate the one Russ posted.

Quote from Pedro on November 15th, 2011, 05:21 PM

Quote from KevinW-dirtwill on November 14th, 2011, 11:54 PM

Quote from Rwg42985 on November 14th, 2011, 11:44 PM

hello everyone, here is an update. i added a volt and amp meter and some notes to this schematic.

also uploading a new vid of the finished russtic 4.5 complete box. ill post ass soon at its uploaded.

thanks, ~Russ

Its all coming together nicely...

The PCB design is almost complete as well.

Here is a sneak peak at the uncompleted board

Hola, muy buen trabajo, puedes parsar los archivos .sch del circuito y el .pcb del PCB que mostras en el archivo . jpg adjunto.
gracias

Hello, very good job, files can be parsed .sch and circuit .pcb PCB to show in the file. jpg attachment.
thanks

Gracias,
estoy armando el circuito de la version 4.2, despues subo fotos
un abrazo a la distancia

Thank you,
I'm putting together the circuit of version 4.2, then upload photos
a hug from a distance

Russ,

Can you speak to how the Rustic device will be used, what supporting equipment to power the resonator?  
 
Do you plan to drive a separate device such as the VIC circuit with the VIC coil arrangement to the resonator or go directly into the resonator?

Also do you feel it will be a good standalone PWM or would it need to drive a larger external mosfet setup in order to work well with a large dry plate cell configuration? Do you think that you can hit resonance with a plate dry cell?  

Do you think that we can hit resonance with a 25 plate style dry cell?

Thanks,
Rolin

Quote from rolinjarvis on November 16th, 2011, 06:30 PM

Russ,

Can you speak to how the Rustic device will be used, what supporting equipment to power the resonator?  
 
Do you plan to drive a separate device such as the VIC circuit with the VIC coil arrangement to the resonator or go directly into the resonator?

Also do you feel it will be a good standalone PWM or would it need to drive a larger external mosfet setup in order to work well with a large dry plate cell configuration? Do you think that you can hit resonance with a plate dry cell?  

Do you think that we can hit resonance with a 25 plate style dry cell?

Thanks,
Rolin

Rolin, the basic version of this generator is for finding and testing Resonance with a VIC transformer and cell.

This dose not have feed back or any other PLL circuitry. This I merely to be use with testing.

There will be an external battery that will power the VIC, although I may add some circuits so we can power it with the wall power. as Stan did this and used a variac with some bridge rectifiers and caps… but a battery would be less components, I would like to be able to have some varied output voltage tough.  But this circuit is the basic signal to be created that Stan talks about…

The IRFP260 should handle 50 amps with a good heat sink and such but I would keep it under 25 amps or so. You can parallel 2 irfp’s if you want. This will up the amps.

The resonant action all depends on the VIC  and cell. With all the deferent arrangements with a dry cell it would be hard I believe to hit resonates. Not to say it could not be done, its just a lot harder, to many variables.

You could use this with any cell/vic. To get things working like stan, you will need to understand all the science behind resonance. You will need inductors (VIC) and a “CAP” style cell.  Its all complicated and I don’t even know how to calculate it. Kind of confusing. Haven’t studded up on that much. Need to.

Hope it helps!

~Russ

Repost:
Version 6.6 new circuit almost completed testing... Released very soon!!

PCB 6.6 Build 1.jpg
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/PCB%206.6%20Build%201.jpg

PCB 6.6 Build 2.jpg
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/PCB%206.6%20Build%202.jpg

PCB 6.6 Build 3.jpg
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/PCB%206.6%20Build%203.jpg

PCB 6.6 Build 4.jpg
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/PCB%206.6%20Build%204.jpg

Thanks for watchin :)

Kevin

Quote from Pedro on November 16th, 2011, 03:50 AM

Quote from Muxar on November 15th, 2011, 11:48 PM

Buenas Pedro,el pcb del ultimo diseño no ha sido terminado todavia pero el del video que russ acaba de colgar lo tienen puesto desde hace tiempo,tienes todos los datos necesarios para hacer la replica del video.

Hello Pedro, the pcb of the last schematic is not finished yet but you have all the info in this forum to replicate the one Russ posted.

Quote from Pedro on November 15th, 2011, 05:21 PM

Quote from KevinW-dirtwill on November 14th, 2011, 11:54 PM

Quote from Rwg42985 on November 14th, 2011, 11:44 PM

hello everyone, here is an update. i added a volt and amp meter and some notes to this schematic.

also uploading a new vid of the finished russtic 4.5 complete box. ill post ass soon at its uploaded.

thanks, ~Russ

Its all coming together nicely...

The PCB design is almost complete as well.

Here is a sneak peak at the uncompleted board

Hola, muy buen trabajo, puedes parsar los archivos .sch del circuito y el .pcb del PCB que mostras en el archivo . jpg adjunto.
gracias

Hello, very good job, files can be parsed .sch and circuit .pcb PCB to show in the file. jpg attachment.
thanks

Gracias,
estoy armando el circuito de la version 4.2, despues subo fotos
un abrazo a la distancia

Thank you,
I'm putting together the circuit of version 4.2, then upload photos
a hug from a distance

sweet!!!

Big Hugs! and blessings!

~Russ

Quote from seamus on November 15th, 2011, 06:57 PM

Quote from Rwg42985 on November 15th, 2011, 05:04 PM

Russtic 4.5 done and working well!!!

A Note To those who are building this version please ground your IRFP mosfet to the Ground on the Circuit Board.

https://www.youtube.com/watch?v=l82e1ICCXLU

enjoy, ~Russ

hi russ nice job have you got any scope pics of the output from the circuit
thanks for all you do for us peter

here are some scope shots for you thanks to Kevin on another late night mission!

the first one is Inverted Gating (yellow) next to non inverted gating (Green),  Yellow trace is before TLP250 and the Green trace at Mosfet Drain.

Inverted yellow green standard

This one is inverted Gating (yellow and green),  yellow trace is before TLP and the Green trace is After the TLP250.

non inverting

hope this helps. i will make a nice video once all the stuff in done so you can really get a good idea of what is happening.

thanks!

~Russ

OFFICIAL RELEASE OF RUSSTIC WFC FREQ GEN V7.0

Schematic V7.0:
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/SCH/Russtic%20WFC%20Freq%20Gen%20SCH%20V7.0.jpg
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/SCH/Russtic WFC Freq Gen SCH V7.0.sch

PCB Board V7.0:
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/PCB/Russtic%20WFC%20Freq%20Gen%20PCB%20V7.0.jpg
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/PCB/Russtic WFC Freq Gen PCB V7.0.pcb

Download Express PCB to use .PCB and .SCH file extentions (PC Only)
http://www.expresspcb.com/ExpressPCBHtm/Download.htm
 
Check your IC Chip Numbers to see if they have been tested:
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/Tested%20IC%20chips.txt

Find all Related Files and Pictures Here:
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/

Old Version 4.0 PCB and SCH
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/SCH/Russtic WFC Freq Gen SCH V4.0.sch
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/PCB/Russtic WFC Freq Gen PCB V4.0.pcb

I am currently calculating a parts price list... Etched PCB boards are available to purchase immediately, msg me for details.

 If you have any questions or need help trouble shooting feel free to send me a private message.

A Huge Thanks to everyone who contributed to this project.

Kevin

Quote from KevinW-dirtwill on November 20th, 2011, 07:17 PM

OFFICIAL RELEASE OF RUSSTIC WFC FREQ GEN V7.0

Schematic:
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/SCH/Russtic%20WFC%20Freq%20Gen%20SCH%20V7.0.jpg
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/SCH/Russtic WFC Freq Gen SCH V7.0.sch

PCB Board:
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/PCB/Russtic%20WFC%20Freq%20Gen%20PCB%20V7.0.jpg
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/PCB/Russtic WFC Freq Gen PCB V7.0.pcb

Download Express PCB to use .PCB and .SCH file extentions (PC Only)
http://www.expresspcb.com/ExpressPCBHtm/Download.htm
 
Check your IC Chip Numbers to see if they have been tested:
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/Tested%20IC%20chips.txt

Find all Related Files and Pictures Here:
http://open-source-energy.org/rwg42985/russ/russtic_testfiles/

I am currently calculating a parts price list... Etched PCB boards are available to purchase immediately, msg me for details.

 If you have any questions or need help trouble shooting feel free to send me a private message.

A Huge Thanks to everyone who contributed to this project.

Kevin

Awesome work guys!  I may have to put in an order when I get to that point.:cool:   Maybe some day when all the switches, gauges, bells and whistles, and doo-dads are figured out, I can print off cases for the Russtic WFC FG. :D

Nate

A new Thread has been started "Building The Russtic WFC Freq Gen V7.0"

http://open-source-energy.org/?tid=178

Russ can you post a Parts list?
and or Gerber file format

as it helps other get involved faster

Dan

That way can can get others  trailing
 more with with it , .

Me I am trying to learn audrino now

Quote from securesupplies on April 21st, 2012, 06:14 AM

Russ can you post a Parts list?
and or Gerber file format

as it helps other get involved faster

Dan

That way can can get others  trailing
 more with with it , .

Me I am trying to learn audrino now

This is the old Thread

Everything you need is right here:
http://open-source-energy.org/?tid=178