open-source-energy.org

Open - Source - Research => Open-Source Research => Topic started by: Forum Administrator on April 4th, 2011, 09:40 AM

Title: Vortex Based Research - Coils & Testing (Part 2)
Post by: Forum Administrator on April 4th, 2011, 09:40 AM
The Coils and Testing Threads are really the same thing, just split to reduce load time.
(Part 2)

This a a micro star-ship coil. it is 3/8" OD

(http://vortexspace.org/download/thumbnails/10649631/IMG_2844.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2844.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_2847.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2847.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_2843.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2843.jpg)

https://www.youtube.com/watch?v=uM9w9bO8vt8

https://www.youtube.com/watch?v=9vIyWizqWok

Here is a tiny Rodin coil. the wire is thinner than your hair!

(http://vortexspace.org/download/thumbnails/10649631/IMG_2824.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2824.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_2820.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2820.jpg)

Here is a couple of 1" star-ships coils. i have made a bunch of these.

(http://vortexspace.org/download/thumbnails/10649631/IMG_2856.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2856.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_2860.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2860.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_2869.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2869.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_2872.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2872.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_2876.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2876.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_2866.jpg)
(http://vortexspace.org/download/attachments/10649631/IMG_2866.jpg)

Here is a couple of other starship coils i have made.

(http://vortexspace.org/download/thumbnails/10649631/IMG_3038.jpg)
(http://vortexspace.org/download/attachments/10649631/IMG_3038.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_3039.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_3039.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_3040.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2968.jpg)

Here is a big HVTWRC.


(http://vortexspace.org/download/thumbnails/10649631/IMG_2966.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2966.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_2967.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2967.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_2968.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2968.jpg)

https://www.youtube.com/watch?v=ZPRNRYEst4o

https://www.youtube.com/watch?v=GAhe06RVS1E

https://www.youtube.com/watch?v=3V4NtS50ptI

https://www.youtube.com/watch?v=hAhpT7VB5oE

Here is a HVTWABHAC, in this photo there is only 2 of 10 windings.

(http://vortexspace.org/download/thumbnails/10649631/IMG_2982.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2982.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_2983.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2983.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_2984.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_2984.jpg)

https://www.youtube.com/watch?v=cAdXhXCu7CU

This is a 3 point rodin style coil it has one wind on it.

(http://vortexspace.org/download/thumbnails/10649631/IMG_3032.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_3032.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_3033.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_3033.jpg)

Here is a big fat starship coil.

(http://vortexspace.org/download/thumbnails/10649631/IMG_3035.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_3035.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_3034.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_3034.jpg)

https://www.youtube.com/watch?v=m7VL5YeCQaQ

This is a star-challis coil, this one is a 36 point.


(http://vortexspace.org/download/thumbnails/10649631/IMG_3026.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_3026.jpg)

(http://vortexspace.org/download/thumbnails/10649631/IMG_3028.jpg)(http://vortexspace.org/download/attachments/10649631/IMG_3028.jpg)

https://www.youtube.com/watch?v=Ygdy3avimEM

This is a 12 point star-challis coil.

(http://vortexspace.org/download/thumbnails/10649631/DSCN5138.JPG)(http://vortexspace.org/download/attachments/10649631/DSCN5138.JPG)

(http://vortexspace.org/download/thumbnails/10649631/DSCN5140.JPG)(http://vortexspace.org/download/attachments/10649631/DSCN5140.JPG)

https://www.youtube.com/watch?v=pIsQ2ASuvy0

https://www.youtube.com/watch?v=fgO-LETL1Ao

https://www.youtube.com/watch?v=WE4yjlIOVDw

Thanks,

~Russ Gries
Title: RE: Vortex Based Research - Coils & Testing (Part 2)
Post by: Casper on September 5th, 2011, 09:55 AM
Hey man, hopw life's treating you well!  Have you done any more testing with the ABHA clad coil and the six-pilser yet? Im really exited to see how it will behave with sophisticated energizing :cool: Peace.
Title: RE: Vortex Based Research - Coils & Testing (Part 2)
Post by: ~Russ on September 5th, 2011, 11:28 AM
Quote from Casper on September 5th, 2011, 09:55 AM
Hey man, hopw life's treating you well!  Have you done any more testing with the ABHA clad coil and the six-pilser yet? Im really exited to see how it will behave with sophisticated energizing :cool: Peace.
well, with all the other  projects the ABHA coil is on the shelf. but i have the Pulse Fire Box now to test the 6 channels with... so when i get time... :) i will try to finish it and see whats up!

thanks!

~Russ
Title: RE: Vortex Based Research - Coils & Testing (Part 2)
Post by: simondodd on May 11th, 2012, 03:44 PM
Hey guys, I have just built my first Star Chalice coil, (actually I built 2 but the first one wasn't tight enough.

(https://www.facebook.com/photo.php?fbid=10151541149120639&set=a.32830910638.64791.529110638&type=1&theater)

I had a thought about bifiliar winding one of these... Do one layer of phase 1 and then 1 layer of the second phase 10 degrees clockwise from the start of the first phase leaving the third phase free as in the rodin coil...

Has this been done before?
Does that even make sense...?
Title: RE: Vortex Based Research - Coils & Testing (Part 2)
Post by: Jeff Nading on May 12th, 2012, 06:42 AM
Quote from simondodd on May 11th, 2012, 03:44 PM
Hey guys, I have just built my first Star Chalice coil, (actually I built 2 but the first one wasn't tight enough.

(https://www.facebook.com/photo.php?fbid=10151541149120639&set=a.32830910638.64791.529110638&type=1&theater)

I had a thought about bifiliar winding one of these... Do one layer of phase 1 and then 1 layer of the second phase 10 degrees clockwise from the start of the first phase leaving the third phase free as in the rodin coil...

Has this been done before?
Does that even make sense...?
PM firepinto, I think he will be able to answer your question, Jeff.:D
Title: RE: Vortex Based Research - Coils & Testing (Part 2)
Post by: firepinto on May 12th, 2012, 08:51 AM
Quote from Jeff Nading on May 12th, 2012, 06:42 AM
Quote from simondodd on May 11th, 2012, 03:44 PM
Hey guys, I have just built my first Star Chalice coil, (actually I built 2 but the first one wasn't tight enough.

(https://www.facebook.com/photo.php?fbid=10151541149120639&set=a.32830910638.64791.529110638&type=1&theater)

I had a thought about bifiliar winding one of these... Do one layer of phase 1 and then 1 layer of the second phase 10 degrees clockwise from the start of the first phase leaving the third phase free as in the rodin coil...

Has this been done before?
Does that even make sense...?
PM firepinto, I think he will be able to answer your question, Jeff.:D
I'm not sure if that has been done before.  I actually haven't tried making a star chalice coil.  It's worth a try to experiment and see if there is different results.  :cool:  
I mostly messed around with rodin style windings in a different type of multiplication table sequence.   You can see what I did here:
http://www.firepinto.com/rodin_coils.html
http://www.firepinto.com/rodin_math.html

Nate
Title: RE: Vortex Based Research - Coils & Testing (Part 2)
Post by: ~Russ on May 12th, 2012, 10:13 PM
Quote from simondodd on May 11th, 2012, 03:44 PM
Hey guys, I have just built my first Star Chalice coil, (actually I built 2 but the first one wasn't tight enough.

(https://www.facebook.com/photo.php?fbid=10151541149120639&set=a.32830910638.64791.529110638&type=1&theater)

I had a thought about bifiliar winding one of these... Do one layer of phase 1 and then 1 layer of the second phase 10 degrees clockwise from the start of the first phase leaving the third phase free as in the rodin coil...

Has this been done before?
Does that even make sense...?
these coils seem to be better as a pickup coil than an output coil... :)

i have done bifilir starship with an offset of 10 degrees.

i have built a  bifilar with no offset on a  Star Chalice coil. was going to use it as a dubble pulse coil...

all depends on the application! :)

 build, test, post, learn! :)

~Russ
Title: RE: Vortex Based Research - Coils & Testing (Part 2)
Post by: Frank Grimes on December 15th, 2012, 07:07 AM
just subscribing.  I hope someone can help me figure out how to subscribe to a thread without posting a message.  The program doesn't seem to let me do that.
Title: RE: Vortex Based Research - Coils & Testing (Part 2)
Post by: Jeff Nading on December 19th, 2012, 05:55 AM
Quote from Frank Grimes on December 15th, 2012, 07:07 AM
just subscribing.  I hope someone can help me figure out how to subscribe to a thread without posting a message.  The program doesn't seem to let me do that.
Hi Frank, look at the lower left corner of the thread your on, there will be a selection to subscribe, click on that, then you will be subscribed.:D
Title: RE: Vortex Based Research - Coils & Testing (Part 2)
Post by: Frank Grimes on December 19th, 2012, 03:49 PM
Quote from Jeff Nading on December 19th, 2012, 05:55 AM
Quote from Frank Grimes on December 15th, 2012, 07:07 AM
just subscribing.  I hope someone can help me figure out how to subscribe to a thread without posting a message.  The program doesn't seem to let me do that.
Hi Frank, look at the lower left corner of the thread your on, there will be a selection to subscribe, click on that, then you will be subscribed.:D
Yes, I've tried doing that.  I get some kind of incompatible message.  My work-around has been to post a message, which then causes me to be become subscribed.  I have also figured out that I can go back and delete the meaningless message, and still remain subscribed to the thread.  I just can't figure out why the "subscription" link doesn't work directly.  Anyway, I am managing to get subscribed to all the topics which interest me.  Thanks much for responding.

PS  Here's the exact message: Authorization code mismatch. Are you accessing this function correctly? Please go back and try again.

I always get that message when I click on the link to subscribe to a thread without posting a message.
Title: RE: Vortex Based Research - Coils & Testing (Part 2)
Post by: firepinto on August 4th, 2013, 05:34 PM
Here's something different!  Pretty cool.:cool:

https://www.youtube.com/watch?v=hJfT7Soihr4
Title: RE: Vortex Based Research - Coils & Testing (Part 2)
Post by: freethisone on August 6th, 2013, 03:00 AM
has anyone created the electronics for a Rodin:huh: coil set up that uses switched  pulsed dc current?