Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EPG
07-04-2011, 09:48 AM
Post: #1
EPG
Hi Russ, I have not read all the posts on the EPG and you might know this already and if so please ignore this and forgive me, but seems like I read that there was a question of how to evacuate and charge the system with argon. You can use what one would use to evacuate and charge an A/C unit [vacuum pump and refrigerant gauges]. Also I had a question on your VIC build, I have about 100 or so LED'S, green, red and yellow. I was wondering if they could be used on the VIC I want to build and if you knew of an inexpensive way to test their wavelength nm, I salvaged them off of old electronic boards as I also did to build my Lawton PWM circuit, all used electronic components, works great. http://www.youtube.com/watch?v=jlgZK1Ydm_I , well there will be more questions to come, thanks..Big Grin

As for most if not all of mans inventions and discoveries, we have or had to observe Gods Creation's, this in it'self proves he exists. Rom. 1:20. Have a good one, Jeff.Big Grin
Visit this user's website Find all posts by this user
Quote this message in a reply
07-06-2011, 08:49 AM
Post: #2
RE: EPG
(07-04-2011 09:48 AM)Jeff Nading Wrote:  Hi Russ, I have not read all the posts on the EPG and you might know this already and if so please ignore this and forgive me, but seems like I read that there was a question of how to evacuate and charge the system with argon. You can use what one would use to evacuate and charge an A/C unit [vacuum pump and refrigerant gauges]. Also I had a question on your VIC build, I have about 100 or so LED'S, green, red and yellow. I was wondering if they could be used on the VIC I want to build and if you knew of an inexpensive way to test their wavelength nm, I salvaged them off of old electronic boards as I also did to build my Lawton PWM circuit, all used electronic components, works great. http://www.youtube.com/watch?v=jlgZK1Ydm_I , well there will be more questions to come, thanks..Big Grin

Jeff, did I answer your qustions in your email? Thanks! ~Russ

"I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer

"We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997"

"If you believe, even tho you can not see, you will see." ~Russ Gries
Visit this user's website Find all posts by this user
Quote this message in a reply
07-06-2011, 03:32 PM
Post: #3
RE: EPG
(07-06-2011 08:49 AM)Rwg42985 Wrote:  
(07-04-2011 09:48 AM)Jeff Nading Wrote:  Hi Russ, I have not read all the posts on the EPG and you might know this already and if so please ignore this and forgive me, but seems like I read that there was a question of how to evacuate and charge the system with argon. You can use what one would use to evacuate and charge an A/C unit [vacuum pump and refrigerant gauges]. Also I had a question on your VIC build, I have about 100 or so LED'S, green, red and yellow. I was wondering if they could be used on the VIC I want to build and if you knew of an inexpensive way to test their wavelength nm, I salvaged them off of old electronic boards as I also did to build my Lawton PWM circuit, all used electronic components, works great. http://www.youtube.com/watch?v=jlgZK1Ydm_I , well there will be more questions to come, thanks..Big Grin

Jeff, did I answer your qustions in your email? Thanks! ~Russ
Yes you did, sorry I was thinking that it didn't go through.

As for most if not all of mans inventions and discoveries, we have or had to observe Gods Creation's, this in it'self proves he exists. Rom. 1:20. Have a good one, Jeff.Big Grin
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  What is an electronic program guide epg parker89 1 311 12-24-2012 03:59 AM
Last Post: Dog-One
  EPG brainstorming Lynx 11 1,043 12-02-2012 05:51 PM
Last Post: FaradayEZ

Forum Jump:


User(s) browsing this thread: 1 Guest(s)