High Quality EPG Photos!!!!

[~Russ/Rwg42985]

High Quality EPG Photos!!! Please Post comments!!!





I Obtained these with your Donations!!!!! Please keep it comming!!! Donate at http://www.RWGresearch.com

Download below zip file for all photos!!! (this is a TXT file with the link in it for now, having problems uploading directly...)

You will need to be loged in to download!

Enjoy and have fun!!!!

~Russ Gries

[firepinto]

Excellent! I think your right that this can be done a more modern way. Can't wait to see what the future holds!

Nate

(05-15-2011 03:49 PM)Rwg42985 Wrote:  High Quality EPG Photos!!! Please Post comments!!!





I Obtained these with your Donations!!!!! Please keep it comming!!! Donate at http://www.RWGresearch.com

Download below zip file for all photos!!! (this is a TXT file with the link in it for now, having problems uploading directly...)

You will need to be loged in to download!

Enjoy and have fun!!!!

~Russ Gries

[Jimboot]

Hey Russ,
Have you seen this pic
It is Chris carson's variable capacitance generator. These pix are in an eric dollard thread at overunity. Maybe nothing but to my untrained eye it looks similar. Btw need to do more to get these forums found in google.

[~Russ/Rwg42985]

(05-18-2011 08:02 AM)Jimboot Wrote:  Hey Russ,
Have you seen this pic
It is Chris carson's variable capacitance generator. These pix are in an eric dollard thread at overunity. Maybe nothing but to my untrained eye it looks similar. Btw need to do more to get these forums found in google.

Jim, thanks! Thats interesting!!! I have not seen this, I will have a look! Thanks!!!

~Russ

[bsibille]

Russ, just getting to the video post, most excellent my brother! I had not seen most of those and your analysis is amazing! There are so many mock-ups of coils, but all seem to accomplish the same thing. Charge up this fluid via an L1 of some type, running at multiple[?] frequencies (makes me wonder how he honed in on these, is he a Keely sort of guy], circulate fluid and pick up coils, get OU out ;-) I know your focus is EPG but wondering if these units came before the HHO/water efforts? Are any specific models verified as OU, or possibly he finally got there with the scaled up 6 layer cake? How cool if that cake was a multi-KW gen! By the time he did the water car, he seemed to have the electronics down to a sophisticated rack mount Telco style cage, but haven't seen any pictures of cards slotted in that cage. I absolutely agree with you that the circuitry isn't much, but gave him the capability to trial various frequency combinations for pulsing the fluid. Man I am really excited right now, you've done apparatus' 100 times more complicated, therefore I know that if the concept works that you can do this!!!
Best,
Blane

---

(05-18-2011 08:02 AM)Jimboot Wrote:  Hey Russ,
Have you seen this pic
It is Chris carson's variable capacitance generator. These pix are in an eric dollard thread at overunity. Maybe nothing but to my untrained eye it looks similar. Btw need to do more to get these forums found in google.

cycles-decibels/sec, interesting!

[ZPEZONE]

First I want to say a Big thanks Russ for your research.... Really cool Stuff!

I total agree with the 8XA reference as far as the switching/timing cct and the opto-isolators, which in turn switch the power transistors. I see that 2N3055 are used to switch the coils. But no high voltage switching!

Very interesting

ZPE

[SirKThomp]

(05-15-2011 03:49 PM)Rwg42985 Wrote:  High Quality EPG Photos!!! Please Post comments!!!





I Obtained these with your Donations!!!!! Please keep it comming!!! Donate at http://www.RWGresearch.com

Download below zip file for all photos!!! (this is a TXT file with the link in it for now, having problems uploading directly...)

You will need to be loged in to download!

Enjoy and have fun!!!!

~Russ Gries

Hi Russ,
I tried to download the zip file of the photo's but it seems to be bad because I can't unzip them even with Winzip. Can you help me? Thank you Kenn.

[~Russ/Rwg42985]

(05-22-2011 09:25 PM)SirKThomp Wrote:  

(05-15-2011 03:49 PM)Rwg42985 Wrote:  High Quality EPG Photos!!! Please Post comments!!!





I Obtained these with your Donations!!!!! Please keep it comming!!! Donate at http://www.RWGresearch.com

Download below zip file for all photos!!! (this is a TXT file with the link in it for now, having problems uploading directly...)

You will need to be loged in to download!

Enjoy and have fun!!!!

~Russ Gries

Hi Russ,
I tried to download the zip file of the photo's but it seems to be bad because I can't unzip them even with Winzip. Can you help me? Thank you Kenn.

Kenn, did you try the link in the txt file?

Let me know! Thanks! ~Russ

[~Russ/Rwg42985]

(05-21-2011 01:33 AM)ZPEZONE Wrote:  First I want to say a Big thanks Russ for your research.... Really cool Stuff!

I total agree with the 8XA reference as far as the switching/timing cct and the opto-isolators, which in turn switch the power transistors. I see that 2N3055 are used to switch the coils. But no high voltage switching!

Very interesting

ZPE

Your welcome! Glad your apart of it! ~Russ

[KeepitTesla]

Wow! Thank you Russ and thanks to all who donated!

[~Russ/Rwg42985]

(10-23-2011 01:50 AM)KeepitTesla Wrote:  Wow! Thank you Russ and thanks to all who donated!

Indeed! ~Russ

[DNKXP]

(05-20-2011 06:02 PM)bsibille Wrote:  Russ, just getting to the video post, most excellent my brother! I had not seen most of those and your analysis is amazing! There are so many mock-ups of coils, but all seem to accomplish the same thing. Charge up this fluid via an L1 of some type, running at multiple[?] frequencies (makes me wonder how he honed in on these, is he a Keely sort of guy], circulate fluid and pick up coils, get OU out ;-) I know your focus is EPG but wondering if these units came before the HHO/water efforts? Are any specific models verified as OU, or possibly he finally got there with the scaled up 6 layer cake? How cool if that cake was a multi-KW gen! By the time he did the water car, he seemed to have the electronics down to a sophisticated rack mount Telco style cage, but haven't seen any pictures of cards slotted in that cage. I absolutely agree with you that the circuitry isn't much, but gave him the capability to trial various frequency combinations for pulsing the fluid. Man I am really excited right now, you've done apparatus' 100 times more complicated, therefore I know that if the concept works that you can do this!!!
Best,
Blane

---

(05-18-2011 08:02 AM)Jimboot Wrote:  Hey Russ,
Have you seen this pic
It is Chris carson's variable capacitance generator. These pix are in an eric dollard thread at overunity. Maybe nothing but to my untrained eye it looks similar. Btw need to do more to get these forums found in google.

cycles-decibels/sec, interesting!

Jim this looks very similar to the units found in old tube type linear amplifiers made back in the sixties and seventies. I forget what they were called, some kind of variable capacitor I think... the gap between the plates in this picture seem further apart than I remember, but that is probably a function of the design parameters...

I mention this because a good place to find units like this would be old time ham operators, swap meets with antique radio equip, etc., etc..

[WillyWatts]

DNKXP - do you mean ATU (Aerial Tuning Unit) which were variable capacitors designed to impedance match the output of a transmitter to the aerial. The caps (and often L) were variable so the radio operator could twiddle to give an aerial that looked like a resistor. The caps were usually intended for high voltage use, variable up to about 300pF

Gee.. I now need to see how the device in the photo was used! So much to read up on.

[~Russ/Rwg42985]

(01-20-2012 10:58 AM)WillyWatts Wrote:  DNKXP - do you mean ATU (Aerial Tuning Unit) which were variable capacitors designed to impedance match the output of a transmitter to the aerial. The caps (and often L) were variable so the radio operator could twiddle to give an aerial that looked like a resistor. The caps were usually intended for high voltage use, variable up to about 300pF

Gee.. I now need to see how the device in the photo was used! So much to read up on.

Stan's thing is this:

http://open-source-energy.org/forum/show...283#pid283

The cap in this thread is not what was on the EPG. we were just guessing at the time... but we found it! check the link.

~Russ

[Stardog]

(05-15-2011 03:49 PM)~Russ/Rwg42985 Wrote:  High Quality EPG Photos!!! Please Post comments!!!





I Obtained these with your Donations!!!!! Please keep it comming!!! Donate at http://www.RWGresearch.com

Download below zip file for all photos!!! (this is a TXT file with the link in it for now, having problems uploading directly...)

You will need to be loged in to download!

Enjoy and have fun!!!!

~Russ Gries

---

Hello Russ ,,looks like copper or brass tubing inside the coils.

[infod2]

It's interesting what Stanley was after b'cose when you connect resistors in parallel the sum is much smaller R. And is the same with inductance. So putting coils in parallel gets you smaller inductance. Although.... That's true for coils with no common core. But in this setup the core is the same... and even more interesting is that the core is made with diamagnetic material (Cooper + water ...I guess).

R= 1/( (1/R1)+(1/R2)+(1/R3)+....+(1/Rn))

L= 1/( (1/L1)+(1/L2)+(1/L3)+....+(1/Ln))

This setup in my opinion should produce a khm... water heater. Since in the cooper pipe we get a lot of eddy current and consequently heat.

D.

[~Russ/Rwg42985]

(10-14-2012 03:03 PM)infod2 Wrote:  It's interesting what Stanley was after b'cose when you connect resistors in parallel the sum is much smaller R. And is the same with inductance. So putting coils in parallel gets you smaller inductance. Although.... That's true for coils with no common core. But in this setup the core is the same... and even more interesting is that the core is made with diamagnetic material (Cooper + water ...I guess).

R= 1/( (1/R1)+(1/R2)+(1/R3)+....+(1/Rn))

L= 1/( (1/L1)+(1/L2)+(1/L3)+....+(1/Ln))

This setup in my opinion should produce a khm... water heater. Since in the cooper pipe we get a lot of eddy current and consequently heat.

D.

yeah, its interesting the way its set up that's for sure.

also, should be a gas in the core... so no water in the core...

~Russ

[FaradayEZ]

The EPG system was before the watercar.

Stanley tries 3 methodes of excallerating the gas..and talks in his new zealand video's about what if he reaches lightspeed. Why try different exallerations..cause it didn't work..? And if it would have worked he would have put out data on it.

Its all full of dust and put on the ground, like discarded.. he never published any workings of the EPG, any amount of output.

If it would have worked, he would have made an electric car

Sorry, EPG is a pipedream

[firepinto]

(10-17-2012 02:01 PM)FaradayEZ Wrote:  The EPG system was before the watercar.

Stanley tries 3 methodes of excallerating the gas..and talks in his new zealand video's about what if he reaches lightspeed. Why try different exallerations..cause it didn't work..? And if it would have worked he would have put out data on it.

Its all full of dust and put on the ground, like discarded.. he never published any workings of the EPG, any amount of output.

If it would have worked, he would have made an electric car

Sorry, EPG is a pipedream

Basing the validity of the EPG system by the location and dust content of the units in the estate photos is hardly concrete evidence. Stan died in 1998, that is 14 dust collecting possible years. Stan was trying to provide solutions for the economy of the day, which was internal combustion engines. He worked to get the WFC technology to pre-engineering phases. No mention of bringing the EPG system to that level of refinement. Perhaps if the Volt, Prius, Tesla, etc. where extremely popular back then he would of switched his efforts to the EPG system.

I wouldn't rule out the EPG anytime soon.

Nate

[FaradayEZ]

(10-17-2012 02:39 PM)firepinto Wrote:  

(10-17-2012 02:01 PM)FaradayEZ Wrote:  The EPG system was before the watercar.

Stanley tries 3 methodes of excallerating the gas..and talks in his new zealand video's about what if he reaches lightspeed. Why try different exallerations..cause it didn't work..? And if it would have worked he would have put out data on it.

Its all full of dust and put on the ground, like discarded.. he never published any workings of the EPG, any amount of output.

If it would have worked, he would have made an electric car

Sorry, EPG is a pipedream

Basing the validity of the EPG system by the location and dust content of the units in the estate photos is hardly concrete evidence. Stan died in 1998, that is 14 dust collecting possible years. Stan was trying to provide solutions for the economy of the day, which was internal combustion engines. He worked to get the WFC technology to pre-engineering phases. No mention of bringing the EPG system to that level of refinement. Perhaps if the Volt, Prius, Tesla, etc. where extremely popular back then he would of switched his efforts to the EPG system.

I wouldn't rule out the EPG anytime soon.

Nate

EPG is to give of electricity..quite easy to make it drive a golfcar if it had worked.

Has Stan himself said somewhere that his epg worked?

I'm not going into the workings again, i've posted already to much on this (don't want to keep stepping on toes) and how it is not taking into account the induction.