open-source-energy.org
›
OPEN-SOURCE-ENERGY.ORG
›
Open Source Threads - POST ANYTHING RELATED! 
My Spiral Cell Mockup
My Spiral Cell Mockup
|
My Spiral Cell Mockup
|
|
05-20-2012, 03:16 PM
Post: #1
|
|||
|
|||
|
My Spiral Cell Mockup
This is my initial mockup.
The holes are smaller than they are supposed to be and I used 14 ga wire to get an idea of where I'm going with this. I still have some spacing and configuration issues. Keep in mind that the finished product will be 1/4" stainless steel tubing. It all looks good on paper, then there's reality. A failure may only be the confirmation that the theory is not valid. It does not mean that there is no solution. To solve a problem, you must define it. A High School Kid just solved a 300 year old mathematical conundrum involving trajectories. |
|||
|
|
05-20-2012, 04:39 PM
Post: #2
|
|||
|
|||
|
RE: My Spiral Cell Mockup
After some serious examination, the sweep of the rear section is way to steep.
Goes to show, making an inexpensive model saves $$$. Back to the drawing board to change the spacing. It all looks good on paper, then there's reality. A failure may only be the confirmation that the theory is not valid. It does not mean that there is no solution. To solve a problem, you must define it. A High School Kid just solved a 300 year old mathematical conundrum involving trajectories. |
|||
|
|
|
05-20-2012, 09:20 PM
Post: #3
|
|||
|
|||
|
RE: My Spiral Cell Mockup
The reason I'm having trouble with spacing is because I'm using standard pipe dimensions to wrap 1/4" tubing with.
Inadvertently, I'm getting conical spirals because I have to space it to eliminate integrity issues. So of course I'm curious. The 14 ga is just because it's easy to work with, when I'm satisfied with the spacing I will use some seriously heavy gauge solid copper for a better look. I will more than likely energize it at this point to see how it acts. If I like what I see, I'll go for the 316 welded tubing. I'm shooting for 3-4 of these cones in only 8" This configuration will allow me to test a number of configurations. 1). Seperate Hydrogen and Oxygen, 1 pos or neg with 3 close neutrals. 2). Pos and Neg with 2 neutrals x 2 cells, HHO 3). 2 Pos and 2 Neg x 2 cells, HHO I'd love to believe it would create a vortex, but the board, which represents Lexan® is a baffle so that's out. It all looks good on paper, then there's reality. A failure may only be the confirmation that the theory is not valid. It does not mean that there is no solution. To solve a problem, you must define it. A High School Kid just solved a 300 year old mathematical conundrum involving trajectories. |
|||
|
|
|
05-21-2012, 08:43 PM
Post: #4
|
|||
|
|||
|
RE: My Spiral Cell Mockup
OK, I believe I have spacing worked out now and should be able to create 4 conical spirals in 8".
All further postings of this project will be in the Projects area. It all looks good on paper, then there's reality. A failure may only be the confirmation that the theory is not valid. It does not mean that there is no solution. To solve a problem, you must define it. A High School Kid just solved a 300 year old mathematical conundrum involving trajectories. |
|||
|
|
|
05-22-2012, 01:17 AM
Post: #5
|
|||
|
|||
|
RE: My Spiral Cell Mockup
sweet!
that's crazy! lol defiantly better to build a cheaper one to test with!!!  ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread: | Author | Replies: | Views: | Last Post | |
| Jon Able's videos, has resonance on his cell | Jeff Nading | 34 | 2,795 |
01-15-2013 07:46 PM Last Post: Jeff Nading |
|
 |
WFC Cell Driver circuit | Sirgoose | 0 | 318 |
05-24-2012 11:52 AM Last Post: Sirgoose |
| Magnetic Induction in an HHO Wet Cell | Robert Twiss | 3 | 1,317 |
05-19-2012 08:39 PM Last Post: Jeff Nading |
|
User(s) browsing this thread: 1 Guest(s)