open-source-energy.org
›
OPEN-SOURCE-ENERGY.ORG
›
RWGRESEARCH.COM 
Lecture/Open Discussion of my work on the EPG system
Lecture/Open Discussion of my work on the EPG system
|
Lecture/Open Discussion of my work on the EPG system
|
|
04-27-2012, 07:26 PM
(This post was last modified: 04-27-2012 08:02 PM by Dogs.)
Post: #281
|
|||
|
|||
RE: Lecture/Open Discussion of my work on the EPG system
Quote:yep! The Electronic Polarization Generator also brings up another realization... What really, causes the molecular movement is the static voltage field. Which is not a magnetic field. As, in the Electronic Polarization Generator, we use a static generator to cause the positive atoms to move towards the negative static charge, as vice-versa. And, in the WFC, we use the static voltage fields to tear HHO apart... Maybe, instead of using a magnetic operation (magnetic sequential pulses), we use an electro-static operation, as is done in the WFC, but on the tube sections that are under the pulsing cores that you created. ---(~)--------([o]) ---->|--------------o power Coil Diode Core Under Coil The motivating force within all of this technology is the static voltage field. Static in the sense that it is high voltage with little to no amperage. We would pulse the negative static charge as the gas and water itself is mostly positively charged (due to 2 Hs). It is also interesting that there are experiments where water is deflected using static charges, or is used to generate static charge. So, we should be able to motivate water using pulsing static charge. As we know that this is being done within the WFC and within the steam resonator. But in these cases we are either tearing water apart, or resonating it to heat it. But, what we really want to do is simply flow it in a single direction. Using the same technique, Pulsing Static Voltage. Best, -Dogs Quote:yep! Hi Russ, The Electrical Polarization Generator also lead me to an other realization... Within all of this technology, Stan uses the Static Voltage Field as the prime motivator for tearing water apart, and for shifting back and forth to very quickly heat it up. It seems to me that what we really need to use to within the EPG is not magnetic pulsing, but once again, Static Voltage Field pulsing. Here's the setup... power coil core diode ---(~)------(((([0]))))------>|-----+ | | +-----------------+ ((( : coil [ : core ->| : diode o : pipe in the center containing slurry. What we want is to generate a high negative voltage field to attract the Hydrogen (+) towards a given core. I believe that this is the key to the EPG and to a new mode of proportion in water. Leverage the fact that the Static Voltage field attracts or repels the greater content of water H(+). Best, -Dogs Quote:yep! Hi Russ, The Electrical Polarization Generator also lead me to an other realization... Within all of this technology, Stan uses the Static Voltage Field as the prime motivator for tearing water apart, and for shifting back and forth to very quickly heat it up. It seems to me that what we really need to use to within the EPG is not magnetic pulsing, but once again, Static Voltage Field pulsing. Here's the setup... power coil core diode ---(~)------(((([0]))))------>|-----+ | | +-----------------+ ((( : coil [ : core ->| : diode o : pipe in the center containing slurry. What we want is to generate a high negative voltage field to attract the Hydrogen (+) towards a given core. I believe that this is the key to the EPG and to a new mode of proportion in water. Leverage the fact that the Static Voltage field attracts or repels the greater content of water H(+). Best, -Dogs Hi Russ, Thanks for setting up the new thread... The Electrical Polarization Generator also lead me to an other realization... Within all of this technology, Stan uses the Static Voltage Field as the prime motivator for tearing water apart, and for shifting back and forth to very quickly heat it up. It seems to me that what we really need to use to within the EPG is not magnetic pulsing, but once again, Static Voltage Field pulsing. Here's the setup... power coil core diode ---(~)------(((([0]))))------>|-----+ | | +-----------------+ ((( : coil [ : core ->| : diode o : pipe in the center containing slurry. What we want is to generate a high negative voltage field to attract the Hydrogen (+) towards a given core. I believe that this is the key to the EPG and to a new mode of proportion in water. Leverage the fact that the Static Voltage field attracts or repels the greater content of water H(+). Best, -Dogs Hi Russ, Thanks for setting up the new thread... The Electrical Polarization Generator also lead me to an other realization... Within all of this technology, Stan uses the Static Voltage Field as the prime motivator for tearing water apart, and for shifting back and forth to very quickly heat it up. It seems to me that what we really need to use to within the EPG is not magnetic pulsing, but once again, Static Voltage Field pulsing. Here's the setup... power coil core diode ---(~)------(((([0]))))------>|-----+ | | +-----------------+ ((( : coil [ : core ->| : diode o : pipe in the center containing slurry. What we want is to generate a high negative voltage field to attract the Hydrogen (+) towards a given core. I believe that this is the key to the EPG and to a new mode of proportion in water. Leverage the fact that the Static Voltage field attracts or repels the greater content of water H(+). Best, -Dogs (04-27-2012 04:56 AM)~Russ/Rwg42985 Wrote: yep! Hi Russ, Thanks for setting up the new thread... The Electrical Polarization Generator also lead me to an other realization... Within all of this technology, consistently Stan uses the Static Voltage Field as the prime motivator for tearing water apart, and for shifting back and forth to very quickly heat it up. It seems to me that what we really need to use to within the EPG is not magnetic pulsing, but once again, Static Voltage Field pulsing. Here's the setup... power coil core diode ---(~)------(((([0]))))------>|-----+ | | +-----------------+ ((( : coil [ : core ->| : diode o : pipe in the center containing slurry. What we want is to generate a high negative voltage field to attract the Hydrogen (+) towards a given core. I believe that this is the key to the EPG and to a Stan's "new mode of propulsion in water". Leverage the fact that the Static Voltage field attracts or repels the greater (positive) content charge of water H(+). Best, -Dogs (04-27-2012 04:56 AM)~Russ/Rwg42985 Wrote: yep! Hi Russ, Thanks for setting up the new thread... The Electrical Polarization Generator also lead me to an other realization... Within all of this technology, consistently Stan uses the Static Voltage Field as the prime motivator for tearing water apart, and for shifting back and forth to very quickly heat it up. It seems to me that what we really need to use to within the EPG is not magnetic pulsing, but once again, Static Voltage Field pulsing. Here's the setup... power coil core diode ---(~)------(((([0]))))------>|-----+ | | +-----------------+ ((( : coil [ : core ->| : diode o : pipe in the center containing slurry. What we want is to generate a high negative voltage field to attract the Hydrogen (+) towards a given core. I believe that this is the key to the EPG and to a Stan's "new mode of propulsion in water". Leverage the fact that the Static Voltage field attracts or repels the greater (positive) content charge of water H(+). Best, -Dogs |
|||
|
|
04-27-2012, 08:28 PM
(This post was last modified: 04-27-2012 08:29 PM by Dogs.)
Post: #282
|
|||
|
|||
RE: Lecture/Open Discussion of my work on the EPG system
(04-27-2012 04:56 AM)~Russ/Rwg42985 Wrote: yep! Hi Russ, Thanks for setting up the new thread... The Electrical Polarization Generator also lead me to an other realization... Within all of this technology, consistently Stan uses the Static Voltage Field as the prime motivator for tearing water apart, and for shifting back and forth to very quickly heat it up. It seems to me that what we really need to use to within the EPG is not magnetic pulsing, but once again, Static Voltage Field pulsing. Here's the setup... Code: power coil core diodeWhat we want, is to generate a high negative voltage field to attract the Hydrogen (+) towards a given core. I believe that this is the key to the EPG and to a Stan's "new mode of propulsion in water". Leverage the fact that the Static Voltage field attracts or repels the greater (positive) content charge of water H(+). Not sure if the winding will add to the effect. May be able to attain results without the need of windings. Just rings around the tubes. Or, maybe just pulse the existing windings with an electro static HV pulse... Code: . diodeBest, -Dogs test... Can't seem to post a new reply... |
|||
|
|
|
04-30-2012, 03:44 PM
Post: #283
|
|||
|
|||
|
RE: Lecture/Open Discussion of my work on the EPG system
Vacuum Ion Chamber Tests For EPG
thanks! also see here: http://open-source-energy.org/forum/show...hp?tid=400 God Bless! ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
04-30-2012, 09:08 PM
Post: #284
|
|||
|
|||
|
RE: Lecture/Open Discussion of my work on the EPG system
russ check this link out http://free-energy-info.co.uk/Chapter11.pdf a little work of telsa
|
|||
|
|
|
04-30-2012, 09:08 PM
(This post was last modified: 04-30-2012 09:26 PM by xxzeropiontxx.)
Post: #285
|
|||
|
|||
|
RE: Lecture/Open Discussion of my work on the EPG system
russ check this link out http://free-energy-info.co.uk/Chapter11.pdf a little work of telsa
try this link about tesla power from air http://free-energy-info.co.uk/Chapter11.pdf |
|||
|
|
|
05-01-2012, 06:32 PM
Post: #286
|
|||
|
|||
|
RE: Lecture/Open Discussion of my work on the EPG system
Hey Russ,
I've kinda been thinking that it may make things less volatile if one could separate the H from the O. Then you could simply run an engine much like u did with the little generator, but use a fuel cell as a source of energy. Please excuse me but I've only thought this out and have not draw anything up yet so plz try to visualize this description. Have an outlet tube on top of the fuel cell made out of whatever materials. This straight tube runs to a Y connector. I saw you have pulsing coils that go 1-2-3-4 1-2-3-4 with the arduino. Put these coils on both sides of the Y connector's tubing. Make one bank pulse (+) and one pulse (-). in theory you could attract the O with the negative and the hydrogen with the positive. and since your coils made a "projecting" motion much like a gauss cannon (LOL) it may be possible to "project" those gases into separate containing tanks or whatever is applicable. let me know what ya think plz. 
|
|||
|
|
|
05-04-2012, 04:31 AM
Post: #287
|
|||
|
|||
RE: Lecture/Open Discussion of my work on the EPG system
(04-30-2012 09:08 PM)xxzeropiontxx Wrote: russ check this link out http://free-energy-info.co.uk/Chapter11.pdf a little work of telsa Thank you! I will, have looked here and there but that's I cool concept, "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
|
05-04-2012, 04:32 AM
Post: #288
|
|||
|
|||
RE: Lecture/Open Discussion of my work on the EPG system
(05-01-2012 06:32 PM)Proeliator53 Wrote: Hey Russ,Hummm, yeah, I see what you mean! Intresting idea. I can seprate the H and O with bills split gas cell! All, See this that is kinda cool http://physicsworld.com/cws/article/news...ving-parts Thanks to pete for the link! "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
|
05-08-2012, 10:43 AM
Post: #289
|
|||
|
|||
|
RE: Lecture/Open Discussion of my work on the EPG system
Hi Russ
Hi all pugsley here You all are doing a FANTASTIC job keep it rolling!! I too would like to jump in. I put together My own 18" 3/8 diam. copper unit. I riffle brushed inside soldered connections for brighter finish 1000 turns per section 28 awg pulsing coils ferrite core 200 turns per. 28 awg. pulsing coils secondary 36 awg, I still need to hit a junk yard for a sight glass photon inject lens. I have an a/c evac. pump and fittings gas...gas.. I have a tig welder with argon and a mig welder with argon/carbon mix??? might aid in vaporization I remember at one point Craig Westbrook talked about carbon just a though Thanks Dan ![[Image: EPGunit1001.jpg]](http://i1054.photobucket.com/albums/s494/poindexter1047/EPGunit1001.jpg) ![[Image: EPGboard1001.jpg]](http://i1054.photobucket.com/albums/s494/poindexter1047/EPGboard1001.jpg)
|
|||
|
|
|
05-08-2012, 01:24 PM
Post: #290
|
|||
|
|||
RE: Lecture/Open Discussion of my work on the EPG system
(05-08-2012 10:43 AM)Pugsley Wrote: Hi RussVery impressive pugsley, that looks great, good job.  
As for most if not all of mans inventions and discoveries, we have or had to observe Gods Creation's, this in it'self proves he exists. Rom. 1:20. Have a good one, Jeff.
|
|||
|
|
|
05-09-2012, 01:21 AM
(This post was last modified: 05-09-2012 01:24 AM by ~Russ/Rwg42985.)
Post: #291
|
|||
|
|||
|
RE: Lecture/Open Discussion of my work on the EPG system
welcome pugsley!
as we discussed on the phone! FANTASTIC! it really looks better than mine! lol hope to help each other get this gas going... how do you plan on testing the output? got an scope or what? amazing job as i know who much dedication it takes to get this that far! lol could you post a schematic of your setup. i know its after Stans original but it could help others. Blessings my friend! chat again soon! ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
|
05-09-2012, 08:10 PM
Post: #292
|
|||
|
|||
|
RE: Lecture/Open Discussion of my work on the EPG system
Hey Guys sorry about such a large picture the irony of it is It's a big deal to get this kind of thing up and running so big it is (LOL) I have a scope to monitor any out put The sad part is a lead from the 2nd channel and hi res freq. counter fell across a hi voltage source and pop! no freq. counter and any thing above 2 volts per div. not working. channel 1 ok so far Just the price we pay for R&D
The schematic is from hi res.pics. that russ supplied I will post a pic of the schematic I'm in the proses of making a evacuated chamber for gas manufacturing. I'm just not sure if I can keep up with the pace y'all have set man you guys are smokin along !!! I will be posting every thing relevant to what I'm doing It just my take a moment or two Thanks Every one |
|||
|
|
|
05-10-2012, 05:11 AM
Post: #293
|
|||
|
|||
RE: Lecture/Open Discussion of my work on the EPG system
(05-09-2012 08:10 PM)Pugsley Wrote: Hey Guys sorry about such a large picture the irony of it is It's a big deal to get this kind of thing up and running so big it is (LOL) I have a scope to monitor any out put The sad part is a lead from the 2nd channel and hi res freq. counter fell across a hi voltage source and pop! no freq. counter and any thing above 2 volts per div. not working. channel 1 ok so far Just the price we pay for R&D Manny thanks for sharing in the open and being apart of the change that's happening! fantastic!!! i'm trying to put together a tig welder type of circuit so we can brake down the iron ect.. will post the data and circuits when i get there... under a vacuum or a vacuum with argon ect... we can only try and see what works... ~Russ ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
|
05-10-2012, 05:15 AM
Post: #294
|
|||
|
|||
|
RE: Lecture/Open Discussion of my work on the EPG system
some thoughts from Terry Dixon
Quote:Russ, My name is Terry Dixon. I am new here and have been talking back and forth with Jeff Nading about the EPG system. He ask that I PM you with this information so here goes. hello terry! i do know what a Mass Spectrometer is, got a friend that build one from scratch! Smile Interesting enough stans cell used high voltage to split the water, in the prosses he was ionizing the gas... and bam, you have just what you described! now, how can i ionize both H and O together? with out them exploding? any thoughts? i guess i can do it separately? thanks terry! ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
|
05-10-2012, 05:23 AM
Post: #295
|
|||
|
|||
|
RE: Lecture/Open Discussion of my work on the EPG system
some thoughts from dogs! :
Quote:I deleted my post regard ElectroStatic Pulsing over Magnetic Pulsing. ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
|
05-11-2012, 08:16 PM
(This post was last modified: 05-12-2012 10:19 AM by Bwood5.)
Post: #296
|
|||
|
|||
|
RE: Lecture/Open Discussion of my work on the EPG system
Enjoyed all the great work you and your team here have done.
Just saw this and it shows what you can do with the proper funding http://www.princeton.edu/research/news/f...a/?id=7050 Also for those that don't know how a Spectrometer works you might want to take a class at MIT and waste 25 min. on youtube. The math can get intense but hang in there. He moves on to a basic cyclotron about 20 min in. http://www.youtube.com/watch?v=w8D3ikuyaGo Russ Is it possible to add 1 of your "coil cells" and a meter on the exaust port of your chamber as a detector? Seems like the next step is to determine/Improve the Ionization quality of what is moving through the chamber. You may want to add shutoff valves to both sides to adjust the flow. Also found some info on DID's (Discharge Ionization Detector) not sure if it appies? https://www.thermo.com/eThermo/CMA/PDFs/...009226.pdf This is a generic PDF and there is a lot more detail on the subject but since i'm not sure if it applies I dont want to send you on a goose chase. Note the polarizer voltage coming in at the bottom. Can that be used to create + or - Ions?? Can helium be Ionized with a much lower voltage and amps? Loved watching your cap blow
|
|||
|
|
|
05-15-2012, 01:35 PM
Post: #297
|
|||
|
|||
 RE: Lecture/Open Discussion of my work on the EPG system
Hi guys I made an error on the size of My EPG tubing it's 1/4 inch not 3/8 sorry for any miss info
 This caught My attention magnetic carbon nano particles http://www.ferrocarbon.it/motiv.html State of the Art References Ferrocarbon Consortium Parco Area delle Scienze, 7a 43100 Parma, ITALY Tel.: +39-0521-905-217 Fax: +39-0521-905-223 Email: ferrocarbon@fis.unipr.it ![[Image: EPGunit1007-1.jpg]](http://i1054.photobucket.com/albums/s494/poindexter1047/EPGunit1007-1.jpg) ![[Image: EPGunit1009.jpg]](http://i1054.photobucket.com/albums/s494/poindexter1047/EPGunit1009.jpg) ![[Image: EPGunit1004.jpg]](http://i1054.photobucket.com/albums/s494/poindexter1047/EPGunit1004.jpg)
|
|||
|
|
|
05-16-2012, 01:21 AM
Post: #298
|
|||
|
|||
RE: Lecture/Open Discussion of my work on the EPG system
(05-11-2012 12:41 AM)haozoudao1988 Wrote: I watched the full vid of the nutty proffeser. I've seen a few of that guys lectures. Got to admit some if it goes over my head. But I get the bits that matter. Yes I see the bit about reverseing the magnet. Makes sense. Tryed it... http://www.youtube.com/watch?v=QIHFUo8S2...ata_player I don't think it's a go. Seems about 1" out and the magnetic flux is done... Just dose not travel far enugh with in the fluid. ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
|
05-16-2012, 04:27 AM
Post: #299
|
|||
|
|||
RE: Lecture/Open Discussion of my work on the EPG system
(05-11-2012 08:16 PM)Bwood5 Wrote: Enjoyed all the great work you and your team here have done. hummm, interesting idea. so whats the Detector part of this unit??? i would say that there needs to be some kind of test for this but i'm having a hard time building / buying the equipment to do such a thing... lol thanks for the ideas ~ ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
|
05-16-2012, 04:29 AM
Post: #300
|
|||
|
|||
RE: Lecture/Open Discussion of my work on the EPG system
(05-15-2012 01:35 PM)Pugsley Wrote: Hi guys I made an error on the size of My EPG tubing it's 1/4 inch not 3/8 sorry for any miss info sweetness!!! thanks for the update and photos! looks really grate! fantastic job!!! call me again some time soon...! ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread: | Author | Replies: | Views: | Last Post | |
| OPen Source Hydrogen Car | securesupplies | 2 | 59 |
Yesterday 12:20 PM Last Post: securesupplies |
|
 |
Stanley Meyers EPG System | admin | 23 | 11,281 |
05-23-2013 12:08 PM Last Post: securesupplies |
| WATER FUEL CELL Technical Brief (Building, Testing and Understanding Stan's Work) | gpssonar | 573 | 24,568 |
05-09-2013 11:53 PM Last Post: Dog-One |
|
User(s) browsing this thread: 1 Guest(s)