open-source-energy.org
›
OPEN-SOURCE-ENERGY.ORG
›
Open Source Threads - POST ANYTHING RELATED! 
"Standard" Water Cell?
"Standard" Water Cell?
|
"Standard" Water Cell?
|
|
01-18-2012, 09:26 PM
Post: #1
|
|||
|
|||
|
"Standard" Water Cell?
I was thinking that a standard cell configuration could help unite all the data collected. Maybe a pair of SS electrical wall plates "Smack type" cell or a single tube cell with consistant dimentions. This way when one of us makes a discovery it should be quicker to duplicate.
Dan |
|||
|
|
01-22-2012, 07:11 AM
Post: #2
|
|||
|
|||
RE: "Standard" Water Cell?
(01-18-2012 09:26 PM)DanB Wrote: I was thinking that a standard cell configuration could help unite all the data collected. Maybe a pair of SS electrical wall plates "Smack type" cell or a single tube cell with consistant dimentions. This way when one of us makes a discovery it should be quicker to duplicate. dan, your right, so we should stick to something standers and then post data. here is the dimensions of s'tans cell. can we not use it? seems that a lot of people are already on there way to using it? http://open-source-energy.org/rwg42985/r...rwings.zip just the tube set... the housing can be anything. and the wall thickness on stans original was .030" but the standard is .028. so that's what i have in the drawing. also see here: http://open-source-energy.org/forum/show...hp?tid=249 the drawings for the tubes really is all we need for now. and just use the single test cell for data comparing? but yes, you are correct. we need to all get the same thing to test on to speed up feed back and move forward faster! ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
01-23-2012, 05:49 PM
Post: #3
|
|||
|
|||
|
RE: "Standard" Water Cell?
Is there an easy way to cut the slots?
The center electrode is filled with? Do you think Meyers' was tring to insulate the outside of the outer tube? |
|||
|
|
|
01-24-2012, 02:30 AM
Post: #4
|
|||
|
|||
RE: "Standard" Water Cell?
Quote:Is there an easy way to cut the slots?i did once drill them out and i don't know if that's a factor or not.. but with out a mill... hack saw and a dremel? a local machine shop would do it... not sure the cost? i would love to supply these tube sets mabby one day soon i can set that up... this may affect tuning, so that may be really important or not...when we get to the point of testing we can try different tubes out and then we will know... time will tell... we are getting there but not yet... Quote:The center electrode is filled with? its a 1/2" solid stainless steal rod, it has been drilled out on the end, then the slots cut. Quote:Do you think Meyers' was trying to insulate the outside of the outer tube? good question. insulate it from water... i would say yes. insulate it from being exposed... i don't know. if there is water around it and the ends caps are also exposed the the same " bath" of water yes. this is bad. you will have "amp leakage" you don't want that. good questions. we have the hardware, we are lacking the electronics... but that's coming... http://open-source-energy.org/forum/show...hp?tid=311 thoughts? good stuff Dan! ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread: | Author | Replies: | Views: | Last Post | |
| HHO gas from water and dirt | Lynx | 39 | 911 |
05-06-2013 04:37 PM Last Post: Dog-One |
|
| salt water batteries | waf77 | 1 | 234 |
01-22-2013 02:18 AM Last Post: Dog-One |
|
| Jon Able's videos, has resonance on his cell | Jeff Nading | 34 | 2,812 |
01-15-2013 07:46 PM Last Post: Jeff Nading |
|
User(s) browsing this thread: 1 Guest(s)