open-source-energy.org
›
OPEN-SOURCE-ENERGY.ORG
›
RWGRESEARCH.COM 
Stan's Original 11 cell Resonant cavity Sketch and Build.
Stan's Original 11 cell Resonant cavity Sketch and Build.
|
Stan's Original 11 cell Resonant cavity Sketch and Build.
|
|
05-18-2012, 01:14 AM
(This post was last modified: 05-18-2012 01:16 AM by ~Russ/Rwg42985.)
Post: #41
|
|||
|
|||
|
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
well... i and others have spent countless hours on trying to find the electrical connections on this unit.looked high and low and everywhere between! and i finaly figured it out...
spent hrs looking at the photos only to find out these were off the shelf parts... hahaha... KISS!!!! i love it! Im not telling you just yet what these are... going to make a video... (not done yet) check it out! we are replicating right??? lol well... hows this! : i was stoked when i found out what these were... could not believe it... hahaha Blessings to all ! ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
05-18-2012, 04:31 AM
Post: #42
|
|||
|
|||
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
(05-18-2012 01:14 AM)~Russ/Rwg42985 Wrote: well... i and others have spent countless hours on trying to find the electrical connections on this unit.looked high and low and everywhere between! and i finaly figured it out... Fantastic find!!!! This is great, looking for them for over a year too!   Br, Webmug |
|||
|
|
|
05-18-2012, 05:36 AM
(This post was last modified: 05-18-2012 05:40 AM by ~Russ/Rwg42985.)
Post: #43
|
|||
|
|||
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
(05-18-2012 04:31 AM)Webmug Wrote:(05-18-2012 01:14 AM)~Russ/Rwg42985 Wrote: well... i and others have spent countless hours on trying to find the electrical connections on this unit.looked high and low and everywhere between! and i finaly figured it out... sad thing is to buy all the parts theses will cost you about 2-8 USD per piece when complete... so your looking at 40-160 USD for the set of 20... 10 cells... i bought some stuff on line for much cheeper than locally... so one part is around 1.10 usd and i got them off line for .11 usd... huge difference! i'm sitting at about 2usd per piece but with all the extra or min order stuff I'm at about 80$ for all the parts with shipping... egh! then i had to drill and make each one... hahah time time... you be surprised what these are... ill give you a hint. there are 5 pieces of off the shelf parts in each connecter!  crazy! i would randomly look for these like every 2-3 weeks lol... then i have some friends go on a mission to find them! came back with a bunch of online links and stuff but just no where could one find them... now i know why... HINT... There home made... i will post the list of the parts when i'm done! Blessings! ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
|
05-18-2012, 05:47 AM
Post: #44
|
|||
|
|||
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
(05-18-2012 01:14 AM)~Russ/Rwg42985 Wrote: well... i and others have spent countless hours on trying to find the electrical connections on this unit.looked high and low and everywhere between! and i finaly figured it out...Awesome! Genuuuiiinnneee Stan Meyer components! lol I wonder how long Stan searched for all these cool parts to use. Nate Ideas are bullet proof. ![[Image: 210877.png]](http://badges.fuelly.com/images/sig-us/210877.png)
|
|||
|
|
|
05-18-2012, 05:56 AM
Post: #45
|
|||
|
|||
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
(05-18-2012 05:47 AM)firepinto Wrote:(05-18-2012 01:14 AM)~Russ/Rwg42985 Wrote: well... i and others have spent countless hours on trying to find the electrical connections on this unit.looked high and low and everywhere between! and i finaly figured it out...Awesome! Genuuuiiinnneee Stan Meyer components! lol I wonder how long Stan searched for all these cool parts to use. haha he didn't... lol he just built them! lol see my other post. i think you were typing when i posted... ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
|
05-18-2012, 07:34 AM
Post: #46
|
|||
|
|||
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
(05-18-2012 05:56 AM)~Russ/Rwg42985 Wrote:(05-18-2012 05:47 AM)firepinto Wrote:(05-18-2012 01:14 AM)~Russ/Rwg42985 Wrote: well... i and others have spent countless hours on trying to find the electrical connections on this unit.looked high and low and everywhere between! and i finaly figured it out...Awesome! Genuuuiiinnneee Stan Meyer components! lol I wonder how long Stan searched for all these cool parts to use. Hi Maybe Stan home made it using diodes from alternator? andy |
|||
|
|
|
05-18-2012, 08:17 AM
Post: #47
|
|||
|
|||
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
(05-18-2012 07:34 AM)andy Wrote:That's exactly what they look like to me, diodes(05-18-2012 05:56 AM)~Russ/Rwg42985 Wrote:(05-18-2012 05:47 AM)firepinto Wrote:(05-18-2012 01:14 AM)~Russ/Rwg42985 Wrote: well... i and others have spent countless hours on trying to find the electrical connections on this unit.looked high and low and everywhere between! and i finaly figured it out...Awesome! Genuuuiiinnneee Stan Meyer components! lol I wonder how long Stan searched for all these cool parts to use. .
As for most if not all of mans inventions and discoveries, we have or had to observe Gods Creation's, this in it'self proves he exists. Rom. 1:20. Have a good one, Jeff.
|
|||
|
|
|
05-18-2012, 09:57 AM
Post: #48
|
|||
|
|||
|
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
I see a light bulb fitting and the spring of a pen?
|
|||
|
|
|
05-18-2012, 10:28 AM
Post: #49
|
|||
|
|||
|
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
I like these games!!! Lol lets try a new hint!
Theses are off the shelf parts.... KISS... And yes. I thought about the dioed thing or a while!!! Lol The only thing about the spring is i havent seen it off te shelf but it's Probbly there... Manily hard to find as its stanless! Cool beans! KISS!!! ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
|
05-18-2012, 11:15 AM
Post: #50
|
|||
|
|||
|
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
interesting link for understand the inductance and coil design.
http://www.richieburnett.co.uk/dcreschg.html Alex |
|||
|
|
|
05-18-2012, 06:06 PM
Post: #51
|
|||
|
|||
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
(05-18-2012 05:36 AM)~Russ/Rwg42985 Wrote:(05-18-2012 04:31 AM)Webmug Wrote:(05-18-2012 01:14 AM)~Russ/Rwg42985 Wrote: well... i and others have spent countless hours on trying to find the electrical connections on this unit.looked high and low and everywhere between! and i finaly figured it out... Ok here is my best guess: 1 - O ring 1 - Spring 1 - Socket Cap flange head screw (allen), drilled for spring. 1 - Hex head screw, sized to fit the head inside allen screw. 1 - nylon locking nut for hex head screw I'm guessing but are the screws soldered together? Nate Ideas are bullet proof.
|
|||
|
|
|
05-25-2012, 02:31 PM
Post: #52
|
|||
|
|||
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
 I think we should support Travis to boost up drawing skills and try and match file to CNC routing file formats.It could take the drawing work which is being done on 11 cell full mass product stage. Much faster. We have to step back and look at ourselves if e hand make ok, but if we approach large cnc factory with " old school tech drawings , it delays things. I am not familiar with industry but , I am sue they want things that plug straight into mills lathes and routers these days. Food for thought  Dan |
|||
|
|
|
06-22-2012, 11:29 PM
Post: #53
|
|||
|
|||
|
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
Im new to this forum so I just wanted to throw out a HUGE thanks to you Russ and all the other members here that are working so hard to piece together this all so important puzzle Stan left us.. I have only been researching hho for around 6 months now and I am soo angry that I just now came across all this great work and teachings.. I am so excited and overwhelmed at all this new info that I cant hardly stand it..
once again thank you! thank you! thank you! steve |
|||
|
|
|
06-23-2012, 07:03 AM
Post: #54
|
|||
|
|||
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
(06-22-2012 11:29 PM)reggaerican Wrote: Im new to this forum so I just wanted to throw out a HUGE thanks to you Russ and all the other members here that are working so hard to piece together this all so important puzzle Stan left us.. I have only been researching hho for around 6 months now and I am soo angry that I just now came across all this great work and teachings.. I am so excited and overwhelmed at all this new info that I cant hardly stand it.. Welcome to the forum Steve, always glad to have new members to add to the thinking process. Jump in anywhere you have an interest, questions, ask away, someone here should be able to answer most of them, Jeff.
As for most if not all of mans inventions and discoveries, we have or had to observe Gods Creation's, this in it'self proves he exists. Rom. 1:20. Have a good one, Jeff.
|
|||
|
|
|
06-24-2012, 05:32 PM
Post: #55
|
|||
|
|||
|
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
Greetings folks, there is a image that had had me scratching my head for a while now so I thought I would just ask.
here goes wish I could paste pic here but not allowed. Anyways in Stans pic of his WFC there are 5 terminals with red wires going into the side in a row. top to bottom. what are they for? My guess is sensors of some sort possibly for water level? I have been doing so much reading lately that my eyes are starting to cross and maybe I just missed it in his patent. thanks Steve |
|||
|
|
|
06-24-2012, 05:48 PM
Post: #56
|
|||
|
|||
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
(06-24-2012 05:32 PM)reggaerican Wrote: Greetings folks, there is a image that had had me scratching my head for a while now so I thought I would just ask. Steve you should be able to attach a photo just above where you would click to post a reply when you are posting, where it says new attachment choose file, once it loads click update attachment.
As for most if not all of mans inventions and discoveries, we have or had to observe Gods Creation's, this in it'self proves he exists. Rom. 1:20. Have a good one, Jeff.
|
|||
|
|
|
06-24-2012, 06:59 PM
Post: #57
|
|||
|
|||
|
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
ok lets try this again. lol here goes the pic. sorry my brain doesnt see ones and zeros vary well so it takes me a while to figure out the computer stuff..
|
|||
|
|
|
06-24-2012, 07:44 PM
Post: #58
|
|||
|
|||
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
(06-24-2012 06:59 PM)reggaerican Wrote: ok lets try this again. lol here goes the pic. sorry my brain doesnt see ones and zeros vary well so it takes me a while to figure out the computer stuff.. I think you are right Steve, that they are water level probes.
As for most if not all of mans inventions and discoveries, we have or had to observe Gods Creation's, this in it'self proves he exists. Rom. 1:20. Have a good one, Jeff.
|
|||
|
|
|
06-24-2012, 08:12 PM
Post: #59
|
|||
|
|||
|
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
thanks again Jeff, stinks bieng the new guy in school, but you guys are proving to be most excellent tutors..
|
|||
|
|
|
06-24-2012, 08:43 PM
Post: #60
|
|||
|
|||
RE: Stan's Original 11 cell Resonant cavity Sketch and Build.
(06-24-2012 08:12 PM)reggaerican Wrote: thanks again Jeff, stinks bieng the new guy in school, but you guys are proving to be most excellent tutors.. Thanks Steve, were all here to help one another, and we were all the new guy at one time or another as well, so don't feel left out, or hesitate to ask a question, someone here will most likely have the answer and remember the only dumb question is one that was not asked, so there are no dumb questions, Jeff.
As for most if not all of mans inventions and discoveries, we have or had to observe Gods Creation's, this in it'self proves he exists. Rom. 1:20. Have a good one, Jeff.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread: | Author | Replies: | Views: | Last Post | |
| WATER FUEL CELL Technical Brief (Building, Testing and Understanding Stan's Work) | gpssonar | 595 | 28,088 |
06-18-2013 01:38 PM Last Post: kcrawford |
|
| Meyer Demo Cell Replication for University Testing by JP | MeyerandMe | 231 | 34,906 |
06-13-2013 04:12 AM Last Post: adys15 |
|
| Stan Meyer pat WO92-07861 V Tesla pat 593,138 | nav | 42 | 1,286 |
06-13-2013 02:57 AM Last Post: bussi04 |
|
User(s) browsing this thread: 1 Guest(s)