open-source-energy.org
›
OPEN-SOURCE-ENERGY.ORG
›
RWGRESEARCH.COM 
Building The Russtic WFC Freq Gen V7.0
Building The Russtic WFC Freq Gen V7.0
|
Building The Russtic WFC Freq Gen V7.0
|
|
07-06-2012, 04:01 AM
Post: #61
|
|||
|
|||
|
RE: Building The Russtic WFC Freq Gen V7.0
Russtic 7.0 fully tested and works well. Thanks to help me. What is the next logical step, the coils perhaps? Uploaded some pictures in the appendix.
geert8550 |
|||
|
|
07-06-2012, 07:06 AM
Post: #62
|
|||
|
|||
RE: Building The Russtic WFC Freq Gen V7.0
(07-06-2012 04:01 AM)geert8550 Wrote: Russtic 7.0 fully tested and works well. Thanks to help me. What is the next logical step, the coils perhaps? Uploaded some pictures in the appendix. Nice work, that case is very impressive.  Are the lables on the front panel etched in? It looks like it came right out of the factory.Nate Ideas are bullet proof. ![[Image: 210877.png]](http://badges.fuelly.com/images/sig-us/210877.png)
|
|||
|
|
|
07-06-2012, 07:23 AM
Post: #63
|
|||
|
|||
|
RE: Building The Russtic WFC Freq Gen V7.0
I like it Geert very nice job, indeed, Jeff.
 
As for most if not all of mans inventions and discoveries, we have or had to observe Gods Creation's, this in it'self proves he exists. Rom. 1:20. Have a good one, Jeff.
|
|||
|
|
07-06-2012, 02:15 PM
(This post was last modified: 07-06-2012 02:20 PM by geert8550.)
Post: #64
|
|||
|
|||
RE: Building The Russtic WFC Freq Gen V7.0
(07-06-2012 07:06 AM)firepinto Wrote:(07-06-2012 04:01 AM)geert8550 Wrote: Russtic 7.0 fully tested and works well. Thanks to help me. What is the next logical step, the coils perhaps? Uploaded some pictures in the appendix. I applied the same way as far in etching with photo paper for pcb. Very hot iron and the ink remains perfectly on the allumium or stainless steel plate. The box is a converted old cassette deck player. A new back plate and a Stainless steel plate in front.
|
|||
|
|
|
07-06-2012, 02:38 PM
Post: #65
|
|||
|
|||
|
RE: Building The Russtic WFC Freq Gen V7.0
Geert that is just totally awesome, very smart idea on the front panel.
As for most if not all of mans inventions and discoveries, we have or had to observe Gods Creation's, this in it'self proves he exists. Rom. 1:20. Have a good one, Jeff.
|
|||
|
|
|
07-08-2012, 12:02 AM
Post: #66
|
|||
|
|||
RE: Building The Russtic WFC Freq Gen V7.0
(07-06-2012 02:15 PM)geert8550 Wrote:(07-06-2012 07:06 AM)firepinto Wrote:(07-06-2012 04:01 AM)geert8550 Wrote: Russtic 7.0 fully tested and works well. Thanks to help me. What is the next logical step, the coils perhaps? Uploaded some pictures in the appendix. Wow nice build geert8550!! That front plate looks very impressive What a great idea to etch it on! |
|||
|
|
|
07-08-2012, 08:15 AM
Post: #67
|
|||
|
|||
RE: Building The Russtic WFC Freq Gen V7.0
(07-06-2012 02:15 PM)geert8550 Wrote:(07-06-2012 07:06 AM)firepinto Wrote:(07-06-2012 04:01 AM)geert8550 Wrote: Russtic 7.0 fully tested and works well. Thanks to help me. What is the next logical step, the coils perhaps? Uploaded some pictures in the appendix. wow! that is pro bro! fantastic idea on the front! I would put some clear coat of some kind other than that that's a fantastic idea!!! looks extremely Nice!!!! very professional ~Russ "I had to go to a source of power greater than Stan Meyer in order to try and bring in this form of technology. And the Lord said that this knowledge of pertaining to water when he was talking to Job and he asked Job the question. He said, "Job have you ever considered the treasures of snow or have you ever considered the treasures of Hell which I have reserved against the time or trouble against battle and war". And the reason I am here today is that the multi international corporate structures can't bring in this type of technology, the Federal governments cannot bring in this technology, it has to come through an individual such as myself and it has to move through you and I. So as I impart this technology onto you, then you have a responsibility to it. This technology must get in through the people or otherwise it will not go forward." - Stan Meyer "We can demonstrate the technology. We can say it’s here but in actuality it will not be Stan Meyers to bring it in. It will be either you or I, the guy down the street, who will come together to bring it in. Otherwise, I do not believe an alternate energy source, whether water fuel cell or other, would ever come in. It’s going to have to be mandated by the people to try to reverse the environmental problems, the environmental damage, that’s actually occurring. - Stan Meyer, 1997" "If you believe, even tho you can not see, you will see." ~Russ Gries |
|||
|
|
|
07-08-2012, 09:49 AM
(This post was last modified: 07-09-2012 10:28 AM by geert8550.)
Post: #68
|
|||
|
|||
RE: Building The Russtic WFC Freq Gen V7.0
(07-08-2012 12:02 AM)KevinW-dirtwill Wrote:(07-06-2012 02:15 PM)geert8550 Wrote:(07-06-2012 07:06 AM)firepinto Wrote:(07-06-2012 04:01 AM)geert8550 Wrote: Russtic 7.0 fully tested and works well. Thanks to help me. What is the next logical step, the coils perhaps? Uploaded some pictures in the appendix. It is not etched. It is ironed and I just removed the paper in the usual manner. The ink is strong enough to continue as printed. It is important that it is very hot, and long heated (10 min). geert8550 |
|||
|
|
|
07-08-2012, 02:31 PM
Post: #69
|
|||
|
|||
|
RE: Building The Russtic WFC Freq Gen V7.0
Hello all,
I just begun to reference all product on farnell. to make it easier for everyone. you can check if the reference is good. thank you Jean-Alexandre |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread: | Author | Replies: | Views: | Last Post | |
| WATER FUEL CELL Technical Brief (Building, Testing and Understanding Stan's Work) | gpssonar | 595 | 28,048 |
Yesterday 01:38 PM Last Post: kcrawford |
|
| WFC must see...Preventing water Short..... | Heuristicobfuscation | 17 | 1,348 |
04-14-2013 01:34 PM Last Post: FaradayEZ |
|
| Water Fuel Cell (WFC) Resonance - Stanley Meyer`s Secret | HillBillyBob | 2 | 535 |
03-13-2013 09:19 AM Last Post: HillBillyBob |
|
User(s) browsing this thread: 1 Guest(s)