Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!

~Russ


TommeyLReed

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #51, on December 11th, 2014, 03:10 PM »Last edited on December 12th, 2014, 03:42 AM
Hi All,

This is my radial pulse engine/motor/generator.

I'm not finished due to more computer power is needed and software up grade.



After it's finished I will have complete control of this engine at a push of a button....

Tom
Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #52, on December 11th, 2014, 03:14 PM »
This is for you FirePinto,

My homemade 3d printer you thought I burn....lol

My extruder heat was too high, but it prints!


https://www.youtube.com/watch?v=4ISSi_7LK0A#ws


Mister Caribbean Roots

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #53, on December 11th, 2014, 04:24 PM »
Hi mnsman,

Nice looking little setup, it's really funny how you can turn it upside down... :cool2:




 

firepinto

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #54, on December 12th, 2014, 04:54 AM »
I'm getting closer to making my final video. :D  Now I have a little bit of some output. :cool2:


https://www.youtube.com/watch?v=WoxGhroojWU#ws

mnsman

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #55, on December 12th, 2014, 06:40 AM »
Quote from Mister Caribbean Roots on December 11th, 2014, 04:24 PM
Hi mnsman,

Nice looking little setup, it's really funny how you can turn it upside down... :cool2:
Thanks buddy.  I needed to make something simple to get back in the groove after a 6 month layoff.  Not very useful but fun to do stupid things with like flipping it upside down. haha

TommeyLReed

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #56, on December 12th, 2014, 10:49 AM »
Hi All,

Just about ready to print some good 3d parts.


https://www.youtube.com/watch?v=QBd35AfQtg0#ws

Just maybe I have enough time to make some 3d parts for my pulse motor...

Tom;)

~Russ

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #57, on December 12th, 2014, 12:03 PM »Last edited on December 12th, 2014, 12:51 PM
nice Tom

when you start having problems or need a question answered:

http://open-source-energy.org/?board=40.0

~Russ

TommeyLReed

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #58, on December 13th, 2014, 06:51 AM »Last edited on December 13th, 2014, 09:43 AM
Hi All,

Just about done, boy this is a pulse engine/motor.

https://www.youtube.com/watch?v=zWxWJrjjRVY#ws

Spec:
Radial Pulse Engine/motor/generator
Input 12v@3a max (motor input), stall load 56w
Input 9v (micro controller)
8 coils 24 gauge at 100 ft each (2.567ohms)
PWM speed control
1 micro controller arduino 2560 mega
ECM reading/controls
Rotational 5 degree steps (72 steps per complete rotation)
Control firing power stoke on each piston coil 0deg(TDC) to 180deg(BDC)
8 led piston firing lights
RPM reading (0- 3600)
Output:
BEMF collector from 8 coils
:yodel:

mnsman

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #59, on December 13th, 2014, 11:03 AM »Last edited on December 14th, 2014, 07:19 AM
Hi all.  This is a failure update.  :blush: I believe in showing the good bad and the ugly.  This is bordering on ugly.   My light trigger circuit is failing because it's picking up the slayer exciter output and is consequently false triggering.  Without going to great lengths to shield I'm out of luck.  Even with shielding it's uncertain if it will work so I'm abandoning it and moving on.  Time is running out.  Very cool builds out there. :)


https://www.youtube.com/watch?v=4d7wEU93Qto#ws

TommeyLReed

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #60, on December 13th, 2014, 11:40 AM »
Hi all,

This is my understanding of how a real pulse motor should work 8)


https://www.youtube.com/watch?v=ol60QtAnxf0#ws

Tom

jeremy gwilt

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #61, on December 13th, 2014, 12:51 PM »
:popcorn:

firepinto

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #62, on December 13th, 2014, 03:50 PM »
Wow Tommy pimped out his pulse motor :thumbsup2:  Lets see it spin! :cool:

Matt Watts

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #63, on December 13th, 2014, 05:32 PM »
Quote from firepinto on December 13th, 2014, 03:50 PM
Wow Tommy pimped out his pulse motor :thumbsup2:  Lets see it spin! :cool:
Yeah Tom, can you bust a rhyme to go with it.  :rofl2:

firepinto


mnsman

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #65, on December 14th, 2014, 07:32 AM »
Hi all.  Last update before I turn in my final.  I'm torn.  Should I dress up the mini me version or stick with the original.  hmmm?  Still have one more thing to try with the big one but I'm out of time. 

So far mini me version runs with as low as 1/2 watt input at ~2k rpm.  It seems really happy at 7V 100ma ~3k rpm.  Anything faster and it goes wacky.  I think adding another opposing drive coil will correct that.


https://www.youtube.com/watch?v=X7I6qvvgNu0#ws

jeremy gwilt

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #66, on December 14th, 2014, 08:34 AM »
im envisioning a helicopter arrangement.....haha
id say the mini-me :thinking:

TommeyLReed

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #67, on December 14th, 2014, 06:04 PM »
Hi All,

This is my radial pulse motor generator entry.
 3 minutes is short time to talk about this motor, but they are the rules.


https://www.youtube.com/watch?v=2bWRBHvb6mM#ws

Spec:
Radial Pulse Engine/motor/generator
Input 12v@3a max (motor input), stall load 56w
Input 9v@ 40ma (micro controllers)
8 coils 24 gauge at 100 ft each (2.567ohms)
PWM speed controller
1 Arduino 2560 mega
ECM reading/controls
Rotational 5 degree steps (72 steps per complete rotation)
Control firing power stoke on each piston coil 0deg(TDC) to 180deg(BDC)
8 led piston firing lights
RPM reading (0- 3600)
Output:
BEMF collector from 8 coils


Good luck to everyone, some real good builds out there :cheerleader:
TLR

HHO4Life

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #68, on December 15th, 2014, 06:36 AM »
This video didn't upload in time it is another update on what I've got done:


https://www.youtube.com/watch?v=62ytvOc3Qqo#ws

mnsman

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #69, on December 15th, 2014, 07:13 AM »Last edited on December 21st, 2014, 06:36 PM
  Well done everyone and thanks for sharing your ideas!!!

TommeyLReed

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #70, on December 15th, 2014, 09:59 AM »
Hi All,

This is a complete build of this radial pulse engine from the start x8 the speed, no I'm that fast of a builder.


https://www.youtube.com/watch?v=U36pLafn_M8#ws

Tom

~Russ


Jimboot

Re: Pulse Motor Build off 2014 Nov14 - Dec14 ( Midnight) !! GET TO BUILDING!!
« Reply #72, on December 16th, 2014, 03:59 AM »
Wow! Just wow! You guys are awesome. Seriously this has to bee the best year yet. Fantastic designs guys. Every one of you I'm just in awe. Thank you so much for the work you've done. It helps us all on our builds.

Russ, you know there's a bromance right?